Uber modz

[toudg]

Hehehe ok, this has to be the worst mod ever but i just *CANT* find some frame bushings (to complete my tailchop).  I've lost both of them during my ride saturday.  I went to my local Home Depot, Rona, etc without any luck.  I think I'll order some online ... anyone has a link ?  THANKS !! 

[Punx Clever]

McMaster-Carr:

http://www.mcmaster.com/#push-in-plugs/=bj3oo5

Looks like you can buy em in packs of 100... but it's less than 10 bucks.  Think of it this way, you won't have to worry about replacing them if they come out

[gr1976]

I just picked up some 1" black plastic plugs at my local Ace that fit perfectly after a couple of light mallet wacks. If you have an Ace check them out mine has much more oddball hardware than the big home improvement stores.

[toudg]

Right size is 1 inch ?  Sorry to bother again hehehe, im at my job =).

[671M900]

Right size is 1 inch ?  Sorry to bother again hehehe, im at my job =).

Try some cheap handlebar ends. I was goofing around one time and the bar ends from my cyclecat clipons fit as frame plugs.

[corey]

14 gauge shotgun shells are the best. spent casings, obviously

[gr1976]

Right size is 1 inch ?  Sorry to bother again hehehe, im at my job =).

the 1" matched the o.d. of the frame tube best...like i said i had to tap them in with a rubber mallet but they are not coming out and look factory...they were $1.50 for the pair.....

they look like this

http://www.designworldonline.com/uploads/Imagegallery/JW-Winco-Plastic-Tube-End-Plugs-1.jpg