Main Menu

Headlight, turn signals, brake lights all malfunctioning!

Started by mooshichoctaw, April 16, 2011, 02:32:56 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

mooshichoctaw

#15
April 25, 2011, 07:51:42 PM
Quote from: ducpainter on April 18, 2011, 05:41:31 PM
Usually it's just the switch needing adjusting.

loosen the two tiny screws and try it. If you listen carefully you'll hear the click of the switch when it's adjusted to activate.

If it doesn't come on there is a small plastic dowel that activates the switch in the master...it may be stuck. Try some WD-40 or similar.

I finally got a chance to take a look at that switch. The pin activates fine... I should have mentioned that I switched my stock levers out for pazzo shorties. I threw out my very bent old levers so I don't have a reference, but I'm guessing there is a little tab on them that hits that switch when the lever is pulled. The new levers don't have anything so it doesn't hit. I guess i need to rig something up to fill that space.

ducpainter

#16
April 26, 2011, 03:43:26 AM
You probably lost the little dowel when you swapped the levers.

You have coffin masters correct?
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


Print
Go Up Pages 1 2
User actions