Steering stem length on different model ducatis

[caperix]

I am working on a street fighter project using a 749 frame.  I am looking to adapt monster triple trees to it for the 30mm offset & the bar mount.  The frame I am using has the non adjustable offset tube.  The S2r monster lower triple I have has the correct diameter tube but the legth is about 1/2 inch to short for the neck.  It looks like the steering stem can just be pressed out of the lower tripple & the correct one can be pressed in when I find one. The issue I am having is finding a 749 lower triple at a good price.
Do other models use the same length stem? I am pretty sure I can use any of the SBK's with the non adjustable stem, 748, 749, 848. But what about other models like hypermotard, multistrada, ect?

[Raux]

why not have a shop do an ergal or ti one?

[caperix]

Cost & lack of good machine shops in my area. Nicolls makes an aluminum one but it is $300. I was hoping to find a rashed lower tripple for cheap & press the stem out of it then install in the monster lowers.  The factory part is not very heavy so nut much point in having one made.

[caperix]

Ok, second question. Does anyone know if the monster steering stem is press fit or screwed in?  I know the superbikes with the adjustable offset screw in but i can not tell on the monster.

[Speeddog]

1st and 2nd generation Monster stems press in.

[caperix]

Got it out, thanks