Cyclecat Clip ons for CBR1000rr

[OverCaffeinated]

Does anyone know if these cyclecat cbr1000rr clip ons will fit my s2r800? Or maybe what cyclecat part number they are? I know it's the DBR-13 that will fit my bike, but what are these?

[Bizzarrini]

What's the diameter of the fork clamp? I think most Monster forks are 50 mm, unless you've done a SBK conversion, which would leave you with 53 mm forks tubes (under the top triple)

[OverCaffeinated]

I've got stock 50mm forks. I just don't know what diameter these cbr clip ons are. I found these for a good price, not sure if they will work though.

[moto]

They are also "side" mounts - which are a bit awkward unless they are mounted on top and the angle dropped...
I had side mounts on a SC1000.

[OverCaffeinated]

my bike is lowered in the front, so I am hoping to mount them above the triple.

[OverCaffeinated]

I spoke with Gary at oncycles and he said that the clipons are HBR03. They have a 50mm diameter and a 1.5inch rise. The only difference from these and the DBR13 that would fit my bike, the DBR13 has a 2.5inch rise. Which is cool with me since I would be mounting them above the triple.

Thanks Gary and oncycles

[toaster]

depending on the year they should be fine.  the cbr1000rr 04-07 uses a 50mm fork.  just use the part numbers for the vortex site to see what fits.

vortex page

every bike that has a part number CL0050 will have the same size forks and use the same vortex bars.  so you could then go to the manufacture you want to use and figure out which bars fit your situation best (for rise and such) based on the vortex part numbers.

[OverCaffeinated]

Your right, the bars pictured are 04-07, so I should be fine. But I will still have to get an adapter kit for my coffin style reservoirs.