696 cutting out near 6500 rpm

[DAYS OF GLORY PAST]

2009 696 with termis is switching off near 6500 rpm then the next day it may run fine. It has happened at 3 bars , 4 bars and 5 bars. It will run fine for days and then it happens again. It feels more dramatic then the rev limiter and once the revs drop it's ok again. 20,000 miles Any ideas?

[Curmudgeon]

This is an idle issue but the cause of your issue might be similar. Something is giving an erroneous reading to your ECU I'd wager. http://www.ducatimonsterforum.org/index.php?topic=57709.0

[Howie]

Any fault codes?  Did you look at the spark plugs?  Also inspect the harness where it may rub against the engine.  There was a recall for this If it is your problem the repair will be free.

Manufacturer: Ducati North America
Model Year: 2009
Models affected: Monster 696
NHTSA Campaign Number: 09V142000
Potential Units Affected: 1755
Problem: Ducati is recalling 1,755 model year 2009 Monster 696 motorcycles. The main wiring harness may come in contact with the vertical cylinder head and exhaust pipe possibly resulting in damage to the motorcycle and a potential hazard to the rider. Any damage to the harness may lead to loss of functionality of the motorcycle's lighting system or an unexpected loss of engine performance, and thereby increase the risk of a crash.

Corrective Action: Dealers will check for interference between the main wiring harness and the vertical cylinder head and exhaust pipe. Dealers will reposition and fasten the main wiring harness to the frame free of charge. The recall is expected to begin during May 2009. Owners may contact Ducati at 800-231-6696.