Main Menu

Monster S4R - Which injector wire to which injector

Started by PhoenixS4R, February 24, 2012, 12:18:40 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

PhoenixS4R

February 24, 2012, 12:18:40 PM
I recently reinstalled a power commander. After removing the injector wires off of the injectors, I was called by the 2 year old and was distracted. I have no idea if I hooked my injectors up backwards, and since this, and a combination of a few other modifications to the motorycle, it's running hotter than normal, nothing rediculous, more than likely worrying about nothing.

Does anyone know which injector goes where so I can eliminate this variable from the equation?






TL;DR, i'm retarded, which injector wire goes where?

rule62

#1
February 24, 2012, 12:34:45 PM
Not sure exactly about the wires. My bike ran a little hotter when I installed a PCIII too. I would think that if you got the injector wires switched, that the bike wouldn't run at all. The cylinder wouldn't be getting gas at the correct part of the stroke. Just my thoughts. Switch the wires up and see if the bike even turns on.

PhoenixS4R

#2
February 24, 2012, 12:49:36 PM
Good point. I'd rather not tear it up and switch the wires for a test but i will do so if no one knows. I have a factory service manual in PDF, but it's pretty flipping hard to read. Maybe it's because I'm so drunk by the time I finally load it.


Speeddog

#3
February 24, 2012, 04:31:09 PM
The bike will run, but not as well.

Pretty sure the wires are labeled on the sleeve or with a little tag or wrap, "OR" or "O" for horizontal and "V" for vertical.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

PhoenixS4R

#4
February 25, 2012, 12:53:56 PM
Quote from: Speeddog on February 24, 2012, 04:31:09 PM
The bike will run, but not as well.

Pretty sure the wires are labeled on the sleeve or with a little tag or wrap, "OR" or "O" for horizontal and "V" for vertical.

You sure, are a gentleman and a scholar.

Ok those are hooked up incorrectly, time to check the other crap stuff I did...


Monsterlover

#5
February 26, 2012, 06:51:34 AM
On the occasions I find a plug or hose that seems easily interchanged with another I mark both halves with a paint marker during disassembly.

Hard to mess up that way ;)
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

PhoenixS4R

#6
February 27, 2012, 08:12:44 AM
Quote from: Monsterlover on February 26, 2012, 06:51:34 AM
On the occasions I find a plug or hose that seems easily interchanged with another I mark both halves with a paint marker during disassembly.

Hard to mess up that way ;)

You don't know me. I can mess anything up! I gotz skillz like that.  [drink]
Print
Go Up Pages1
User actions