Need some help with slipper clutch instal

[rsoffar]

Hey guys, so i picked up this stm clutch off the forum the other day and Im ready to instal it. I have all the tools together but the only guide i have found online to help me is here....

looks like a decent guide, it seems pretty similar other than the shape of the springs and basket.

After that the help i need is seen in the below photo, the part that is highlighted doesnt seem to be mentioned in the above link. Hoping someone can chime in on where it fits in, or if the above link isnt what i need maybe someone can help out with the order these things go together.

thanks

[Düb Lüv]

You have a factory one that's behind the clutch basket. Pull the old one out but you need the green o ring for the slipper one. Oil up the oring and slide it back onto the transmission shaft and slide the slipper spacer on with the flange on the outside. If you look at the slipper spacer there's a tiny indention for the o ring to rest on.

Here's some install directions from yoyodyne.
http://www.yoyodyneti.com/ProductInfo.aspx?productid=T10901