Bike won´t start after cutting wires from dashboard.. No immobilizer on the bike

[brad black]

that's quite common.

[jooohoo]

Update:
Problem not solved. I've manage to connect the broken wire and made the bike start. Thought I solved the problem, but when I test started after setting up the front.. Light, speedo etc. the bike was dead. I still think it has to be problem with the start button and the wires down to the solenoid. So I have to dig in more to see if there are other bad connection to the wire.

[mr5ev3n]

In my start/kill motor switch, I had a tiny wire become unsoldered from the copper contact plate.  I didn't realize it until I took it completely apart.

[jooohoo]

Thanks for the advise mate, I would check the switch yet again.

In my start/kill motor switch, I had a tiny wire become unsoldered from the copper contact plate.  I didn't realize it until I took it completely apart.

[jooohoo]

Found the problem. It was another old wire that was almost torn. The wire goes down to the solenoid, and the error was down inside the main electric harness. Kind of pain in the A to find, but the bike is now starting again:)

[brad black]

it's always nice when you find a problem.