Main Menu

Front sprocket nut size

Started by Silver duck, August 12, 2013, 06:52:50 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Silver duck

August 12, 2013, 06:52:50 AM
On a 2007 s4r testa I'm changing the front sprocket does anyone know what size the front sprocket nut is.

Speeddog

#1
August 12, 2013, 11:40:19 AM
32mm.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Silver duck

#3
August 12, 2013, 12:02:26 PM
Is it hard to remove?

Speeddog

#4
August 12, 2013, 12:38:59 PM
Depends on your equipment.  ;D

Badass impact gun necessary on every one I've done.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

brad black

#5
August 13, 2013, 06:25:38 AM
some of the earlier ones are just hand tight once you bend the washer up.  seen quite a lot like that.
Brad The Bike Boy

http://www.bikeboy.org

Silver duck

#6
August 13, 2013, 08:57:35 AM
I hope I can break it loose with a 1/2" breaker bar

Silver duck

#7
August 13, 2013, 04:50:40 PM
Sprocket was not tight came right off with a 1/2 ratchet. Manual says 186 nm is thus right

Speeddog

#8
August 13, 2013, 05:09:58 PM
Quote from: Silver duck on August 13, 2013, 04:50:40 PM
Sprocket was not tight came right off with a 1/2 ratchet. Manual says 186 nm is thus right

Yes, 186 Nm.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~
Print
Go Up Pages1
User actions