Anyone with an S4R and a Termignoni exhaust (side by side)?

[eyduc]

I am looking for a side view of this exhaust installed on an S4R.  I am considering it for my S2R1000.   Basically, I want to see the pipe routing and how far the muffler tips extend if any past the tail.   I think it is carbon cans.   Has anyone shortened the CF mufflers if they were too long?  I have a tail chop.   So, it might not match up.

96439403B    Ducati Monster Termignoni Raised Silencers: S4R '04-'06 

[junior varsity]

if this is the one on the left of the seat, one on the right of the seat, i do believe that is the exact kit on muskrat's s4r. He has also chopped the tail.

[stopintime]

The S4R (Desmoquatro)('05/'06?) shares exhaust with S2R800.
I don't know why they won't fit an S2R1000, but you might at least want to double check.

[eyduc]

Oh I know it will fit.   I just want to see how it looks.  I've seen pics of the Zards and the Sparks.   But none with the Termis.

[junior varsity]

Here's his bike I was referring to:

[eyduc]

Thanks!  Do you have a pic of the right side?  It does seem to be a bit longer than the Zards or Sparks.

[junior varsity]

I just went to his profile here (click above on Members, go to N and page back to the M's some, or go through M's until you find Muskrat) and go backwards through his posts until you find some. I know he's posted some, perhaps some straight on from the back to show the symmetry.

They sound good, I've followed him around North Texas a number of times. Finish is nice, and I think he's had them re-cleared to prevent any UV fading or whatnot.

[eyduc]

Thanks!  I just made the order and will have it soon!   I'll have a new DP ecu for an S4r up for sale too.

[DarkStaR]

The S4R (Desmoquatro)('05/'06?) shares exhaust with S2R800.
I don't know why they won't fit an S2R1000, but you might at least want to double check.

Per all of the exhaust catalogs I've looked at, the s4r/s2r800 exhaust does not fit the s2r1000...

[eyduc]

This is always a point of confusion.  The three bikes mentioned above do not share the same header/collector/mid pipes.  However, the slip-ons will all be the same.   I only bought the slip-ons at this point.  Next up will be the collector-mid pipes.

[SwiftTone]

So did the slip ons fit?

[Nekkid Tim]

So did the slip ons fit?

Following the links in his signature, it looks like they did:

_1020633 by Eric Y, on Flickr