2 valve FI intake manifold differences

[caperix]

I picked up a set of Hypermotard 1100 SP cylinders & heads for a motor I am building, I am having trouble finding a set of intake manifolds that fit this head.  Ducati lists it as part number 140.2.068.2A, other 1000, 1100 intake manifolds I have do not fit these heads, the bolts are about 5mm further apart center to center & the port is about 1mm larger.  I am trying to find used to save a few dollars but most listings say the SP is the same as standard 1000, 1100 intakes.  Now I am not sure if once I get the correct intakes if they wil fit the throttle bodies or if they are also larger on the SP.  I thought the SP just came factory with beter cams, does any one know of the intake differences between the models?

[Raux]

http://www.ducatimonsterforum.org/index.php?topic=55685.0

[koko64]

Would Sportsclassic manifolds fit? Just guessing as they share the same airbox.

[caperix]

Sport classic use the same part number as the other 1000/1100ds motors. From what I can tell looking through parts calatogs it needs to be from an 1100 evo

[koko64]

How did you go? Find out more info?

[caperix]

Still searching, evo manifolds are hard to find used. One I find those then I can see if the throttle bodies are larger. Unless someone has an evo apart they can measure the throttle bodies on.  The motor is going in a 749 frame so I may have to get creative.