Enrichner - Setup on Handlebars: 97 M900

[greenohawk69]

I'm being stumped with my enrichner placement on the handlebars and not being able to fully engage the clutch. The plunger section (Side photo) is hampered from easily engaging the clutch lever.

Is there something I'm missing with the enrichner? Is the lever supposed be pushed back or pulled forward when running?

I know I s/h taken pics, but I thought this was easy to remember and put back together. Lol

[greenohawk69]

If anyone has pictures they can share,  that would be helpful.

97 M900

[Howie]

Horizontal is full enrichment, vertical is off.  Your photo looks like your lever is rotated 90^o from it's proper orientation.  Enricher on is supposed to face you.

[Speeddog]

It's held to both the master cylinder and clamp, each with a small flat head screw.

Looks like yours are missing.

[stopintime]

Do you have a mirror mounted in the pivot hole 

[greenohawk69]

Horizontal is full enrichment, vertical is off.  Your photo looks like your lever is rotated 90^o from it's proper orientation.  Enricher on is supposed to face you.

Thanks...that was what I thought, but wanted confirmation.

[greenohawk69]

It's held to both the master cylinder and clamp, each with a small flat head screw.

Looks like yours are missing.

Yes it is and thanks for bringing it up. Never had one and this is the first when removing it that I wondered what the hole was for. Lol

[greenohawk69]

Do you have a mirror mounted in the pivot hole 

Yes...like the position there better.