|
gatorgrizz27
|
 |
« on: August 26, 2008, 08:06:27 PM » |
|
If you have seen many Sport Classics, you have noticed the Zard Exhaust for them.  Is there anyone who can use photoshop to fit that to an S2R? Here is an example of an S2R (not mine)...  I know that the lower exhaust will fit with no issues, as both bikes use the same motor and the SSS will clear it fine. However, the upper exhaust looks like it will be a problem where it runs behind the frame tube behind the cylinder head. The frame tube or exhaust may need to be modified to fit, as well as relocating the rear master cylinder reservoir. It may be easiest to cut the exhaust underneath the heat shield on the header fabricate an s-bend to run through the triangle on the frame where the master cylinder is sitting. I would like to see what it may look like before I consider buying a $1500 exhaust and hacking it up  Thanks |
|
|
|
|
Logged
|
|
|
|
|
uclabiker06
|
|
« Reply #1 on: August 26, 2008, 08:21:18 PM » |
|
You have got to be kidding. That is really creative.
|
|
|
|
|
Logged
|
Life is never ours to keep, we borrow it and then we have to give it back.
2006 S2R
2009 Smart
|
|
|
|
Raux
Guest
|
|
« Reply #2 on: August 26, 2008, 08:22:44 PM » |
|
uh, 696 pipes do that.
|
|
|
|
|
Logged
|
|
|
|
|
He Man
|
|
« Reply #3 on: August 26, 2008, 10:08:27 PM » |
|
uh, 696 pipes do that.
Uh, no they dont. Do you see where the lower silencer is coming from?  thats how it would look. kind of lol. thats the Roland Sands HM |
|
|
|
« Last Edit: August 26, 2008, 10:13:33 PM by He Man »
|
Logged
|
2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!
Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU
|
|
|
|
supertjeduc
|
|
« Reply #4 on: August 27, 2008, 03:09:40 AM » |
|
I know about cutting up a new Zard (done that)  About that SC system is think you have to pay for a lot you can't use If you want two dampers you could buy two Yamaha YZF 600 R6 Zard slipons (ZY090SSO) and mount them like the Hyper |
|
|
|
|
Logged
|
|
|
|
|
gatorgrizz27
|
|
« Reply #5 on: August 27, 2008, 11:22:25 AM » |
|
I would use the complete system, the only thing changed would be one s-bend where it runs behind the frame tube. It seems like that would be much simpler than fabricating whole new headers.
|
|
|
|
|
Logged
|
|
|
|
|
supertjeduc
|
|
« Reply #6 on: August 27, 2008, 11:26:14 AM » |
|
I would use the complete system, the only thing changed would be one s-bend where it runs behind the frame tube. It seems like that would be much simpler than fabricating whole new headers.
That lower damper is very close to the ground on the SC ,i have seen a SC with that setup and the lower damper had a flatspot |
|
|
|
|
Logged
|
|
|
|
|
moto
|
|
« Reply #7 on: August 30, 2008, 09:15:31 PM » |
|
We have that exhaust on our Sport Classic project. We were looking into building a system like that for our Monster project.  Note how the breather is installed on an extention.  Check out the curved swingarm that allows the muffler to tuck in.  I love this exhaust. It is what inspired me to buy the SportClassic. It sounds like an old classic DUC. Very deep-very loud. Almost Harley like. It pulls hard from down low (1000RPM+). Designed right for an S2R, it would kick ass. -M |
|
|
|
|
Logged
|
www.motowheels.com96 M944 98 900SS FE 01 996R 02 MV Agusta F4 750 05 999R 06 SC1000 07 1098 08 M696
|
|
|
|
DarkStaR
|
|
« Reply #8 on: August 31, 2008, 01:36:10 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
S2daRk
|
|
« Reply #9 on: August 31, 2008, 09:23:02 PM » |
|
Nice job w/ the Photoshop  I think it looks good! It would be tricky to get the top pipe to weave in and out of the frame...but the rear wheel looks good when it's fully exposed like that. |
|
|
|
|
Logged
|
|
|
|
|
wraith
|
|
« Reply #10 on: August 31, 2008, 09:44:25 PM » |
|
|
|
|
|
|
Logged
|
......... I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and I am what some people call mentally retarded.
|
|
|
|
DarkStaR
|
|
« Reply #11 on: August 31, 2008, 10:00:08 PM » |
|
Note how the breather is installed on an extension.
Hey Moto, Is that breather extension sold separately? I may have a use for that. |
|
|
|
|
Logged
|
|
|
|
|
Buckethead
|
|
« Reply #12 on: August 31, 2008, 10:02:29 PM » |
|
If you have seen many Sport Classics, you have noticed the Zard Exhaust for them.
If by "noticed" you mean "lusted after," then yes, I have "noticed" that Zard exhaust. uh, 696 pipes do that.
 |
|
|
|
|
Logged
|
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string.
|
|
|
|
moto
|
|
« Reply #13 on: September 01, 2008, 01:33:46 PM » |
|
Hey Moto,
Is that breather extension sold separately?
I may have a use for that.
I'll look into that... -M |
|
|
|
|
Logged
|
www.motowheels.com96 M944 98 900SS FE 01 996R 02 MV Agusta F4 750 05 999R 06 SC1000 07 1098 08 M696
|
|
|
|
moto
|
|
« Reply #14 on: September 02, 2008, 02:55:06 PM » |
|
Hey Moto,
Is that breather extension sold separately?
I may have a use for that.
It is available. Please email me at martin@motowheels.com for details. -M |
|
|
|
|
Logged
|
www.motowheels.com96 M944 98 900SS FE 01 996R 02 MV Agusta F4 750 05 999R 06 SC1000 07 1098 08 M696
|
|
|
|
