Ducati Monster Forum

powered by:

December 22, 2024, 11:46:39 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the DMF
 
   Home   Help Search Login Register  



Pages: [1]   Go Down
  Print  
Author Topic: Tire prep, on a cold day ? ? ?  (Read 1910 times)
JDS 07 S4Rs
Full Member
***
Offline Offline

Posts: 233



« on: September 06, 2008, 06:59:12 AM »

Tomorrow will be my final track day of the Yr. I borrowed a set of tire warmers (Tyre socks, no controls) Temperature is going to be about + 50 F in the morn, high of 65 -70.
Is there anything that I can do  to get maximum bite out of these tires ? Michelin, Power Race, medium soft.

Tire pressures, heating time. Any input appreciated.

Thanx

JDS
Logged

2007 S4RS
2007 1098S Salvage Title (that's it. NO MORE BIKES)
02 GSXR 750 Trackbike - Ins Write/off
06 ZX636R Trackbike  - Ins Write-off (I couldnt help it, the price was right)
2003 BMW 1150R
2004 450 YZ
&,,, a few others :-)
gm2
Hero Member
*****
Offline Offline

Posts: 5097


« Reply #1 on: September 06, 2008, 09:08:35 AM »

not really.. psi, talk to the local michelin guy.  heating, with no controls just heat them as long as you can before the first session and then be consistent about getting them back on the warmers throughout the day.  the goal is to try and keep them consistently warm... heat cycles, bad.
Logged

Like this is the racing, no?
JDS 07 S4Rs
Full Member
***
Offline Offline

Posts: 233



« Reply #2 on: September 06, 2008, 10:45:41 AM »

Right,, ok. Yes I heard that heat cycles are bad. I doubt if  Michelin Man out tomorrow. I will keep the heat to them.  Thanx gm2
Logged

2007 S4RS
2007 1098S Salvage Title (that's it. NO MORE BIKES)
02 GSXR 750 Trackbike - Ins Write/off
06 ZX636R Trackbike  - Ins Write-off (I couldnt help it, the price was right)
2003 BMW 1150R
2004 450 YZ
&,,, a few others :-)
gm2
Hero Member
*****
Offline Offline

Posts: 5097


« Reply #3 on: September 06, 2008, 11:06:36 AM »

if you can do that all the time, regardless of weather, your tires will be much happier.  and no prob.  Smiley
Logged

Like this is the racing, no?
Spidey
Crashin' mofo
Hero Member
*****
Offline Offline

Posts: 4842



« Reply #4 on: September 06, 2008, 01:27:17 PM »

Talk to the michelin guy about PSI, but as a general rule, set them 1 PSI lower for each 10 degrees lower it is than ususual.  What you want is for your tires to be at a certain PSI when hot.  If it starts off colder, then they'll have a longer range of temps til they get up to hot temp.  So, set a lower
PSI to allow for the larger range between cold temps and hot temps.
 
As gm2 said, keep the warmers on (but don't cook them too much).  Even if you're not going to keep the warmers cooking throughout lunch because it's too long, make sure to put the warmers on the tires after you get on the track.  Don't plug 'em in.  Just keep them on the tires.  That will allow the tires to cool down more slowly and will help against heat cycling.
Logged

Occasionally AFM #702  My stuff:  The M1000SS, a mashed r6, Vino 125, the Blonde, some rugrats, yuppie cage, child molester van, bourbon.
JDS 07 S4Rs
Full Member
***
Offline Offline

Posts: 233



« Reply #5 on: September 07, 2008, 06:33:38 PM »

Good advice guys. I did exactly that. I  will be buying a set of these this winter. My tire's were happier (the wear looks more consistant), my bike was happier, & my body was happier.
There were 2 guys that Hi-sided today. Both were on the 2nd lap, neither of the riders had warmers.
Not once today did I slide my tires on acceleration. On breaking my ass end kicks out as I am entering a corner. My times were down a couple tenths as well.

Tire warmers are a very good investment. Who would have thought ! ! !. They should have had these things 25 Yrs ago  Smiley
Logged

2007 S4RS
2007 1098S Salvage Title (that's it. NO MORE BIKES)
02 GSXR 750 Trackbike - Ins Write/off
06 ZX636R Trackbike  - Ins Write-off (I couldnt help it, the price was right)
2003 BMW 1150R
2004 450 YZ
&,,, a few others :-)
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1