Oz Monster Trading Post

[kyle]

Anybody contemplating a SBK fork swap?

http://www.ebay.com.au/itm/150780669892?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

This an easy thing to do? Can I retain original top triple and bars?

[suzyj]

This an easy thing to do? Can I retain original top triple and bars?

Depends on your definition of easy.  If your bike is a relatively recent one with 65mm caliper mounts and 25mm axle it's reasonably straightforward.  I used the same model forks on my monster (actually mine were 998 ones, with shiny gold legs, but the dimensions are the same).  I kept my original top triple but bored it out to 53mm and shimmed out the bottom triple.  I didn't keep my bars though.  Stock bars will hit the adjusters on the top of the forks.  You have to either raise the bars to clear them or remove them altogether and use clipons.  I had to bore my axle to allow me to adjust the damping on the bottom, but the auction includes a superbike axle.

Here's a thread showing the process I used.  http://ducatimonsterforum.org/index.php?topic=41414.msg740226#msg740226

Since then I've done some further work on the top triple to clean it up, removing the bar mounts, and also removing some material from the clipons so that I can get my bars a little more swept back and get more steering lock.



Definitely get those forks.  They'll make your monster handle awesomely.

[brimo]

http://www.bikesales.com.au/all-bikes/private/details.aspx?Cr=2&R=12058376&trecs=7&__Ns=p_PriceSort_Decimal

[Rowdy]

http://www.bikesales.com.au/all-bikes/private/details.aspx?Cr=2&R=12058376&trecs=7&__Ns=p_PriceSort_Decimal

No bites yet??

[monstermick58]

Rowdy

    I bit.....

        Re: lights, check PM








                                   Mmick

[cicii]

Looking to sell my high mount staintunes off my M620, will fit your bike

PM sent thanks Kyle

[koko64]

For Sale
Price Drop

Clutch Parts Low KMs
Basket $40
Drum $40
Pressure plate $20
Buy all the clutch parts and you can have them for $80.

Brake and Clutch master Cylinders from 95 M900. No leaks good nick. With original levers and 1 adjustable lever
$50 the pair

K&N Pod filters Used for 1 week $40 the pair OR I can throw in the jet kits with the pods for $50 (Tuning help included).

Sachs rear shock for M900 suit '93-'01 model fully worked to be fully adjustable with receipts from Krooztune ($700 worth of work). Suit 95-110kg rider or lighter rider for track work. Remote compression, rechromed shaft, new seals, revalved with Kayaba valves and gas cannister. Lightweights would need to revalve (and I have lighter springs to suit skinny bums which I can throw in to offset revalving costs). This is a custom shock going cheap.
$300.

2 x jet kits Factory Pro kit for 900 and Dynojet kit $40 for both (good to have both for mix and max tuning options which I can help you with). Buy them with the Pods above for $50 the lot.

Open to offers. I'm a Western Oriental Gentleman so I'm open to haggle .

PM if interested.

[monstermick58]

Koko,

     PM'd ya









                                       Mmick

[Two dogs]

4 SALE
MPL (German made quality    ) dry clutch pressure plate used but not worn.
retail for $270  comes with a bearing but a new one would be around $20
Offers
iphone photo so colour is not well represented

bump
It is at the moment  a paper weight ....seems a waste.
Any resonable offer considered (not you though Paul  )

[koko64]

Curious as to how much it weighs.
Looks like a nice billet piece.

[Nibor]

Posting for a friend @ the shop. Sharp Racing Ducati monster centre stand. Used once or twice, virtually mint. Red. Was $160 back when it was Ducati Novo, now so cheap I can't mention the price online. Speak to Brian at Metro Ducati in Ringwood if you're keen. Last one!!! I got the 2nd last

[Rowdy]

Now that the 1098 is gone I've got a couple of parts left.

Rear stand, Kaneg brand. Suit 1098, 848 etc. Good unit. Good nick. Paid about $200.00. Thinking $120.00 ono. Pick up from Nth Brisbane (Business Hours) or West Brisbane (After Hours) or you can pay pack and send to pack it and send it to wherever you like. Apparently fits 2011+ Multistrada as well?? PM me for more pics, offers, comments etc.








HID light kit suit 1098. Removed from the bike working, presume it still does. Nice bright kit. White 8000w kit I think. Paid about $180.00 delivered. Sell $60.00. Pick up or delivery as above. Pm me for more info as above too.





Thanks.

Termi mufflers have been sold.

Make an offer on the stand or HID kit if you want.

Thanks.

[koko64]

Posting for a friend @ the shop. Sharp Racing Ducati monster centre stand. Used once or twice, virtually mint. Red. Was $160 back when it was Ducati Novo, now so cheap I can't mention the price online. Speak to Brian at Metro Ducati in Ringwood if you're keen. Last one!!! I got the 2nd last

Got the last one, thanks for the heads up Nibor. Cheap as..
Now I can give my mate's back.

[S4Rocks]

Bump

This finishes today

Top box no reserve $150
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=160765107999#ht_500wt_1156

Hi,

Some more parts, need to make some room, pick up preferred (North West Sydney)

Standard Monster Handlebars $80


K&N Filter (Just re charged) $50


Standard air box (Just the half shown) $10


Standard ECU (Not sure on state) $10


Plus still have Top box to suite an S4 Price reduced Start from $150
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=160765107999#ht_500wt_1156

Cheers

[Twizted]

Are the S4 clip ons exactly the same as the ST2/ST4 ones?