2008 S2R1000 Project Ideas and Discussion

[army_intel]

So I am currently in Iraq dreaming of getting back to Colorado Springs to my Duc.  I have been trolling these boards for quite some time now looking for ideas and ways to mod my bike. (Stock just isnt my nature)  I have come up with a number of mods that I want to do, and I am looking for feedback, opinions, and suggestions as to what will and will not work together.  Since I am a single E-6 with zero bills and a paid off bike, my budget isnt that limited, which the exception of trading it in for a S4R.

Just to give you an idea of what I am trying to create, I have a Black 2008 S2R1000.  I am really trying to black out my bike, so a number of paint/mods are planned to do so.

Exhaust- I have already preordered/placed a deposit on Motocreations Boom Tubes, and looking to get them painted black.
Intake - I was going to do with PODs at first, but I have realized this probably wont work and I am going with a DP Open Airbox/Filter.
Tuning- I dont want to spend the cash on a DP ECU, so for starters I am going to check out the Fat Duc O2 Eliminator.
Tail Chop - Already did Cookies before I deployed, but looking to grab a LED rear light integration kit and a SupaBrake from Vizitec (He has one on hold for me)
Front Headlight/Gauges - I saw a great mod on here to lower them under the triple, and I am going to paint the ring and assemblage black for style and go with some low profile LED front signals
Triple/Clip-ons - I really want to get rid of the handlebars and go with some clip-ons, and I figured I might as well replace the entire triple with a SpeedyMoto one.  I am an average height guy (5'11"), so while I want some clip ons, I would prefer the stock handlebar angle so I dont have to lean too far forward on longer rides.  I read a couple of people are having some problems with the SpeedyMoto Clip-ons, and Ranger06 suggested the Woodcraft ones.
ClutchCover-SpeedyMoto 5 spoke (just looks in sync with the wheels)
14T Front Sprocket

I am sure I there are somethings I am leaving out, but since I just got my flu shot and feel lightheaded, my mind isnt right and any and all suggestions/comments/feedback is welcome!

Thanks!

[He Man]

Exhaust- I have already preordered/placed a deposit on Motocreations Boom Tubes, and looking to get them painted black. Ceramic Paint!

Intake - I was going to do with PODs at first, but I have realized this probably wont work and I am going with a DP Open Airbox/Filter. I think motocreations designed the boomtubes with the intent of putting them on a stock system without the need for modifying fueling too much. You might be able to get away with it.

Tail Chop - Already did Cookies before I deployed, but looking to grab a LED rear light integration kit and a SupaBrake from Vizitec (He has one on hold for me) Dont get the LED board, it sucks ( i have one and its not bright at all, but if your not worried about that then by all means get it) vizitech makes a 460L superled thingy, if thats what your talking about, that thing is the shit!


Triple/Clip-ons - I really want to get rid of the handlebars and go with some clip-ons, and I figured I might as well replace the entire triple with a SpeedyMoto one.  I am an average height guy (5'11"), so while I want some clip ons, I would prefer the stock handlebar angle so I dont have to lean too far forward on longer rides.  I read a couple of people are having some problems with the SpeedyMoto Clip-ons, and Ranger06 suggested the Woodcraft ones. If you wait long enough speedymoto is trying to make ones designed for the monster. But if you are going to lower your headlight, you can use them without issue. The fitment issue was due to the headlight and blinkers + coffins (which you dont have) The same applies to any clip on without any rise (such as the apex)

Stay safe

[army_intel]

I was definetly thinking ceramic paint!

Good point about the headlight lowering...I dont get home until after the first of the year, so I might just make it in time for the SpeedyMoto Monster Clip-ons.

Yes I was talking about the Vizitec 460L LED +SupaBrake.  The idea of a blinking brake light seriously appeals to me since both my brother and I have been nearly rearended by soccer moms on cell phones.

[Monstermash]

Before you make a final decision on the Boom Tubes, do yourself a favor and listen to a bike with them installed. It's not that they sound bad, just really loud and different. By different, I mean they make the bike sound more like a Harley than a Ducati.

[army_intel]

Mash, I have heard the sound of boomtubes, and I love that loud, Harley-like sound.  I also love how they clean up the rear wheel.  I am doing it not only for sound but "eye appeal" as well.

[Duck-Stew]

Yeah, but a Harley can't pull 8500 rpm!!!  But yeah...they're loud.  With that much more air going into the engine (DP filter & box-top) and that much air going out of the engine (boomtubes) you will need some more fuel.  So, that will need to be addressed.

Other then the ceramic coating on the exhaust, I think you've got a winner there!!!

[Capo]

I was definetly thinking ceramic paint!

Good point about the headlight lowering...I dont get home until after the first of the year, so I might just make it in time for the SpeedyMoto Monster Clip-ons.

Yes I was talking about the Vizitec 460L LED +SupaBrake.  The idea of a blinking brake light seriously appeals to me since both my brother and I have been nearly rearended by soccer moms on cell phones.

You may have to wait a while for the Vizitec unit, and thats if your on the waiting list.

[army_intel]

Yeah I know I am going to have a fuel problem, but aside from the DP ECU ($$$$$$$) and RB3 (Heard too many bad things), I dont have many options in the ECU box.

[army_intel]

What type of paint do you recommend for exhaust then?

[NAKID]

I have the S2R1000 prototype boomtubes on mine. They are the ones Mash is talking about. I am currently running them without baffles and yes, they are LOUD, but I don't think they sound like Harley pipes. A Ducati's exhaust note is distinctive, straight pipes or not...

[army_intel]

Nakid, then you are a man I need to talk to.  Are you running stock intake and stock ECU?

[He Man]

I believe he runs his bike with a Power Commander III on his '06.

I have an RB3 unit...... its with RB right now to get the firmware updated....still...

[army_intel]

So I suppose the difference is that the 06 doesnt have the Euro 3 emissions and I do....  I know there arent that many differences between the 06 and 08.   

[He Man]

the 06 has the same euro3 emission standards. Its just the ECU is different.

[NAKID]

He Man speaks the truth. I run a custom PCIII, vented airbox and the boomtubes with no baffles. I have an 06 which has the O2 sensor, but no issues with the engine light staying on with it disconnected....