Longer shift lever?

[Mash]

okay, so I've got big feet.  motorcycle boots (like my sidi canyons) make me look like herman munster.  all that aside, my foot gets stuck between the peg and shifter on my s2r1k.  i have to make a conscious effort to move my foot into and out of upshifting mode.  i've googled and searched but am finding no luck in a search for a longer shifter.  any one know of, or have FHE with a longer setup? (btw, I know about the aftermarket rearsets, but that's not what I want.)

[psycledelic]

This is more of a question then an answer, but have you tried adjusting the position of your shifter a couple of notches up and/or down?  Doesn't make up for your big feet / small space problem, but it might give you an easier transition until you can find a more perm. fix.  I know that I played around with mine for a while before I finally reversed the shift pattern. 

[duclvr]

This is more of a question then an answer, but have you tried adjusting the position of your shifter a couple of notches up and/or down?  Doesn't make up for your big feet / small space problem, but it might give you an easier transition until you can find a more perm. fix.  I know that I played around with mine for a while before I finally reversed the shift pattern. 

+1 When I picked my Duc up from the dealer he made the adjustment for me, because my boots were going to get stuck.

[Mash]

This is more of a question then an answer, but have you tried adjusting the position of your shifter a couple of notches up and/or down?  Doesn't make up for your big feet / small space problem, but it might give you an easier transition until you can find a more perm. fix.  I know that I played around with mine for a while before I finally reversed the shift pattern. 

Thanks for the advice, and yes, I've adjusted it quite a bit.  Any higher than I have it now, and my foot rests on the lever while riding.  Not a real good thing for me.

I ran across these adjustable pegs while searching last night.  They're the MFW Adjustable Foot Peg System from monsterparts.  You can see the parts at http://www.monsterparts.com/pc/MFW-1/Accessories/MFW-1.html

A user was kind enough to post a pic of his installed pegs.  This may work for me as it allows a 30mm movement of the peg.  I'm real close to ordering these.