Am i correct that you cannot put DB killers in Arrow and Termi CF Cans?

[WhiteStripe]

Seems like they are only available on the Ti versions.  Can someone confirm this?  Can you use a Ti DB killer in a CF can anyway?

Thanks!

[Cicero]

For which bike?

[Cicero]

This might help you out, it doesn't address you question specifically, but I see CF termis, getting baffled in there.

http://ducatimonsterforum.org/index.php?topic=24498.15

[teddy037.2]

my Ti arrows never came w/baffles, and I don't see any sort of way to fit some in (no holes for screws, or grooves for c-clips.... nothin')

[Armor]

I have carbon Arrows that came with removable DB killers.

[mtn_mnztr]

I HAD carbon Arrows that came with removable DB killers.

ditto

[Speeddog]

I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans.

[numbskull]

My carbon Termis came with baffles in the box as well.

[WhiteStripe]

thanks.  must only list the part under the Ti b/c they are the same.  Appreciate the help.

[teddy037.2]

I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans.

which end caps?

I was thinking of looking into some sort of way to baffle my cans, in case I decide to pull commute duty on the monster, and I'd hate to piss off the new neighbors

[Boris]

Here is e-mail exchange with Greg Centuori from Arrow.

Re: 2004 Ducati S4R CF Arrow End Caps with BafflesTuesday, April 28, 2009 11:01 AM
From: "Greg Centuori" <info@arrowexhaust.com>Add sender to Contacts
To: "Boris ...." <haloguy.....com>
Boris,

     Thanks for your purchase of Arrow exhaust for your Ducati.  I can
assist you with your request.  The homologation kit for your silencers costs
$219.00 plus shipping.  Let me know if you have any further questions or if
you would like to order a kit.

Best Regards,

Greg Centuori
Arrow Exhaust, USA

----- Original Message -----
From: "Boris ...." <haloguy......com>
To: <info@arrowexhaust.com>
Sent: Tuesday, April 28, 2009 9:54 AM
Subject: 2004 Ducati S4R CF Arrow End Caps with Baffles


> Hi Greg,
>
>
>
> I have 2004 Ducati Monster S4R with Carbon Fiber Arrow exhaust installed
> that is getting too loud for me (49 years old and getting older every day
> :-). I would like to get new end caps that have the clips for the baffles
> and install it on my pipes so I can have quieter pipes for everyday riding
> with option to take the baffles out while on track. I found your e-mail on
> Ducati Monster List and was told that you can facilitate my request.
>
>
>
> Thanks
>
>
>
> Boris

[Gus Duc]

Seems that some of the Arrows, especially the Ti cans, came with the end caps that have the grove that allows you to run baffles.  My carbons didn't so I purchased a set of the above mentioned endcaps & baffles from Greg @ Arrow USA but I never got around to installing them.  I know another member here did so on his S4rt & he claims to have gained some bottom end as well.  They seem very restrictive but you can always drill some extra holes or just take them out.

[MiniSuper]

I am sorry to revive this ancient threat.  I recently purchased an s2r 1000 with FBF full carbon exhaust, which I was told is re-badged Arrow.  I am looking for db killers due to noise issue.  Does anyone still have the db killers and/or the endcaps?

Anyone knows how effective are the killers?  Right now I am setting off alarms and waking neighbors.

[slowkitty]

You can buy the DB killers from Arrow.  My local Arrow agent quoted me about $60 for a pair.  They must come with the circlips.

[MiniSuper]

slowkitty,  I've contacted Arrow.it directly and they refer me to their US representative who quoted me 80 USD per pair.  It is good to know that I could get them cheaper.  Do you mind telling me which dealer did you get that quote from?  Some of the posters have said that I need the slotted end cap for the db killers to stay in.  Have you done it with out changing the end cap?  Can you describe the process?