handlebars upside down....

[JoDuc]

07 S2R1K - Will it work if I turn the handlebars upside down? 

[JoDuc]

Come on ya'll... I'm sure some of you have done this. Before I start to loosen everything up i was looking for a little feedback... Thx!   

Just found this;

http://ducatimonsterworldwide.org/index.php?topic=1442.0

but was looking for more info....

[Slide Panda]

Duc and Cover  did it to his S2R1k with and assist from Zooom and was pretty happy.  It's not a big job, but you do have to drill new holes for the switch clusters.

[55Spy]

Duc and Cover  did it to his S2R1k with and assist from Zooom and was pretty happy.  It's not a big job, but you do have to drill new holes for the switch clusters.

Or remove the tab

which is what I did because I wanted to change the angle of the cluster.

[carlosbarrios]

There's nothing to it, really.  Just need to either drill 2 holes in the handlebar, OR shave off the little studs on the controls.

Here's another thread you can read:

http://ducatimonsterworldwide.org/index.php?topic=2431.0

[NAKID]

I did it, was happy, just went to clipon's though...

[MuscovyDuc]

Was gonna do that but I decided to go with clipons. I am very happy with my apex-clipons