Main Menu

Motor swap 05 s2r

Started by karrotx, August 14, 2009, 12:58:05 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

Porsche Monkey

#15
August 16, 2009, 09:56:23 AM
How exactly does an output shaft get bent? 
Quote from: bobspapa on July 18, 2009, 04:40:31 PM
if I had a vagina...I'd never leave the house

csp808

#16
August 16, 2009, 11:05:16 AM
Quote from: Ducaholic on August 16, 2009, 09:56:23 AM
How exactly does an output shaft get bent? 
Poor workmanship during a repair perhaps?

karrotx

#17
August 18, 2009, 05:59:25 PM Last Edit: August 18, 2009, 06:03:56 PM by Speeddog
Quote from: Ducaholic on August 16, 2009, 09:56:23 AM
How exactly does an output shaft get bent? 

Your guess is as good as mine. Contact <Name and location removed>; maybe he'll tell you what he didn't tell me ;).

<mod>
Let's not get into those kind of details please.
Thanks.
</mod>

woppini

#18
August 18, 2009, 07:00:41 PM
If your concern is about needing a torque wrench, there are many other concerns  you should be aware of. I really suggest you get a knowledgeable buddy to help you through the process. Is this a proper diagnosis? I agree, how do you bend an out put shaft. If that truly is the issue, look at the engine case where the rear engine mounting bolt passes through the frame, through the engine.  The case can crack if its wacked hard enough. Even though youll be selling your engine, you might want to take a close look at that area to inform any new buyer.

GAAN

#19
August 18, 2009, 09:52:28 PM
output shafts get bent when the chain is too tight

ducatiz

#20
August 19, 2009, 05:57:22 AM
Quote from: Mother on August 18, 2009, 09:52:28 PM
output shafts get bent when the chain is too tight

not to mention gearbox gets all munged.
Check out my oil filter forensics thread!                     Offended? Click here
"Yelling out of cars, turning your speakers out the window to blast your music onto the street, setting off M-80 firecrackers, firing automatic weapons into the airâ€"these are all well and good. But none of them create a merry atmosphere of insouciance and bonhomie quite like a revving motorcycle.

Slide Panda

#21
August 19, 2009, 06:06:31 AM
Aaaand the shaft bearings... and god know what else.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

NAKID

#22
August 19, 2009, 06:23:39 AM
Quote from: ducatiz on August 19, 2009, 05:57:22 AM
not to mention gearbox gets all munged.

Is that the technical term?
2005 S2R800
2006 S2R1000
2015 Monster 821

ducatiz

#23
August 19, 2009, 06:32:26 AM
Quote from: NAKID on August 19, 2009, 06:23:39 AM
Is that the technical term?

in english, yes.

in italiano, it is "tutti buffala"
Check out my oil filter forensics thread!                     Offended? Click here
"Yelling out of cars, turning your speakers out the window to blast your music onto the street, setting off M-80 firecrackers, firing automatic weapons into the airâ€"these are all well and good. But none of them create a merry atmosphere of insouciance and bonhomie quite like a revving motorcycle.

karrotx

#24
August 21, 2009, 02:42:41 PM
Thanks for all the advice!

Change of plans, I worked out a deal with Duc Pond - they will keep the old motor, do a full service on the new motor, and install for a good price. Total cost is still cheaper than $1826 and I get a fully serviced motor. I can't wait for them to finish!

rockaduc

#25
August 21, 2009, 03:19:48 PM
excellent!!

[clap] [clap] [clap]
If you can see Chuck Norris, he can see you.  If you can't see Chuck Norris, you may be only seconds away from death.

Slide Panda

#26
August 24, 2009, 11:51:24 AM
Quote from: karrotx on August 21, 2009, 02:42:41 PM
Change of plans, I worked out a deal with Duc Pond - they will keep the old motor, do a full service on the new motor, and install for a good price. Total cost is still cheaper than $1826 and I get a fully serviced motor. I can't wait for them to finish!

How's it coming along?
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

karrotx

#27
August 24, 2009, 12:37:47 PM
Quote from: yuu on August 24, 2009, 11:51:24 AM
How's it coming along?

They don't work Sunday and Monday - I'm assuming they haven't started. I'm hoping to get the bike back by Friday.

Cabbie

#28
August 28, 2009, 12:35:12 PM
This bike's chain was the tightest I have ever seen.. SCARY tight..

Slide Panda

#29
August 28, 2009, 01:09:11 PM
So tight it bent the main.... poor thing.  But apparently, it's got a new heart as of today and is headed home
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.
Print
Go Up Pages 1 2 3
User actions