Anyone have a source on LED's to light my Rizoma belt covers?

[fouramdesigns]

I'm wanting to add a couple of red LEDS to my Rizoma belt covers to light up the plexiglass area. Need a source on some that will fit, mold, bend in this area.

[ManOrAstro-Man?]

I don't think you have a lot of clearance in there correct? So you'd probably need some surface mounted LED's, not through holes. I don't know if this will work, but check it out:

http://www.dealextreme.com/details.dx/sku.10136

This web site has a bunch of gadgets from Hong Kong.

[Slide Panda]

http://www.customdynamics.com/ - poke around in there

[fouramdesigns]

I don't think you have a lot of clearance in there correct? So you'd probably need some surface mounted LED's, not through holes. I don't know if this will work, but check it out:

http://www.dealextreme.com/details.dx/sku.10136

This web site has a bunch of gadgets from Hong Kong.

That's what I was thinking. Thanks guys for the info.

[teddy037.2]

http://www.customdynamics.com/ - poke around in there

+1

was just about to say the same... one of my coworkers tinkers on cruisers and that's where he gets all his stuff

[xcaptainxbloodx]

sorry if this was in the others links as I dident check them but...

radioshack sells square LEDs that are about a mm thick and focus light out the top, you probably wouldent need more than 8 or 12 to light up the windows in the covers. the only problem would be in finding a spot to put the circuit so that it would run off the battery.

[RBX QB]

http://www.superbrightleds.com/led_prods.htm
http://ledaccentlights.net/store/

I got some from Joe's this week to supplement my custom tail. I think he may even be willing to do custom work. Only downside is that they aren't the high intensity LEDs. If you're good with electronics, superbrightleds has the HI ones.

[RUFKM]

Good service here and some pretty cool stuff.  I'm working on putting some 3" mini light bars where my passenger pegs once were.  I'm hoping for a little more visibility in night city traffic and add some credability to the empty brackets.

www.radiantz.com

[zLoki]

I'm wanting to add a couple of red LEDS to my Rizoma belt covers to light up the plexiglass area. Need a source on some that will fit, mold, bend in this area.

Post up in the tutorials section if you get this done, would be interested in seeing the results...