PCIII?

[ArcDeDucati]

You will def have to hunt for the old version if you want one. It is actually for the M1000ie if that helps. I would have to find my paperwork for the PN...

I don't want to make you go diggin through paperwork, but it would be a big help.  If it's for the M1000ie than I should still be able to get it through them no?

http://www.powercommander.com/powercommander/powercommander_iii_usb.aspx?mk=5&mdl=26&yr=2004

It's only available in one version, not sure if its the Race ready or the other.

Thanks for all the help everyone.

[hypurone]

ArcDeDucati, that looks like the part number I remember. But I will look for the PN when I get home tonight anyway...

There is some special hookup required on it as the connectors aren't right or the wiring needs some tweaking or something. I can't remember. Also the ground is really short and it limits where you can install it (you don't want to extend the ground wire as it will cause signal issues/breakup). Mine is tucked halfway under the tank on the left side so I can get to the faceplate buttons for on-the-fly tweaking.

You can see it peeking out here:

[hypurone]

ArcDeDucati, that is def the part number that was installed on my bike. I found the receipt! 

[ArcDeDucati]

Great. So this will allow for full adjustablity throughout the rpm's and throttle % WITHOUT the DP ECU?

[hypurone]

Yup, it is "pre EPA fine" vintage.