New monster 110S mods

[swankdaddy7]

oh yeah... love the gold bits     

Your Rizoma Aero turnsignals look great and I really like the Rizoma levers too - are they reach-adjustable on both sides?  But Rizoma classic mirrors Them Sir are Rizoma Radial Naked mirrors and they are - IMHO - the Bees Knees 

Very nice job there swankdaddy7

Hows the Oberon clutch slave compare to stock?

Thanks.  The levers are reach adjustable on both sides.  Thanks for the correction I had forgotten the mirror name.  The turn signals (front to be installed) are among my favorites.

I've only ridden once with the Oberon due to weather and working on the bike, but the pull is noticeably easier.  The difference is stated at 20% (29 or 29.5 mm), and I would probably have guessed 25%.

[swankdaddy7]

I had some powder coating done recently.

[BastrdHK]

Like what your doing, but I will make one small suggestion for your gas cap.  Leave the ring gold, cap black, lift tab gold and "DUCATI" on the lift tab black.  It would really accent the bike well! 

[ungeheuer]

Looking good there swankdaddy7    Mate, those Rizoma mirror mounts appear to raise the mounting point up a little (8-10mm or so over stock??).... can you confirm that to be so, coz I could use a little extra height in my mirror mounting position too?  Also, are they the p/n BS770B shown here?  >>  http://www.pjsparts.com/catalog/product_info.php?cPath=265&products_id=882

Cheers 

[ungeheuer]

Off topic...You asked me on another thread several days ago about the height difference from stock with the Rizoma mirror mounts that I have on my M1100S.  I finally measured that the Rizoma mounts are 4-5 mm higher than stock.

Thanks for that, 5mm is enough to justify a pair.  Cheers 

[mrplease]

what pegs did you put on there? those look like rizoma pegs...

do you have a part number?

[DucatiTorrey]

 
now get some termis and PC the tips too.

[swankdaddy7]

what pegs did you put on there? those look like rizoma pegs...

do you have a part number?

They are Rizoma rearsets and pegs.

[swankdaddy7]

now get some termis and PC the tips too.

The termi's just came in.  I had the ends ceramic coated black.  Need to install now.

[mrplease]

which rizoma pegs? i cant find any that if the rizoma rearsets...

part number?

[mrplease]

do the rear ones fold?

[swankdaddy7]

do the rear ones fold?

Rear footpegs fold, front ones are spring loaded.  All four pegs are Rizoma gold pegs (I don't have the part number), but they were "standard" Rizoma gold pegs to my knowledge.  I bought them separate from the rearsets and passenger hangers which came with silver/aluminum pegs.

[mrplease]

was it the folding pegs kit on this page?

http://www.rizoma.com/Prodotti/ProdottiSport.cfm?ID_categoria=72&firstLevelIndex=4&IDSez=2

[swankdaddy7]

was it the folding pegs kit on this page?

http://www.rizoma.com/Prodotti/ProdottiSport.cfm?ID_categoria=72&firstLevelIndex=4&IDSez=2

Yes, I'm 99% sure that is exactly what I bought.