s2r 1000 Rebuild

Started by Punx Clever, January 18, 2010, 03:46:46 PM

Previous topic - Next topic

Speeddog

Quote from: larsson77 on January 20, 2010, 02:20:25 PM
do Rizoma offer replacement bars or can you replace a broken bar with any other 7/8 handlebar?

Yes, Rizoma offers replacements.

Other 7/8 bars won't work.
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

larsson77

Quote from: Speeddog on January 20, 2010, 03:47:12 PM
Yes, Rizoma offers replacements.

Other 7/8 bars won't work.

Good to know, thanks

patorojo

Quote from: larsson77 on January 20, 2010, 02:20:25 PM
do Rizoma offer replacement bars or can you replace a broken bar with any other 7/8 handlebar?

I had the unfortunate experience to need one.  Yes they do.  PJ's Parts, they don't list it, just email them.  While they are threaded, they also used some sort of crystalline glue stuff, so I had to use a big a$$ pipe wrench to get the old one off.
Arne Berger
2007 S2R1K
2007 DL650
2005 DRZ400S

patorojo

Quote from: Punx Clever on January 20, 2010, 09:21:06 AM
I'm thinking about it, but I'm also thinking about how I can mount a GPS in the space left from where the risers were. Then, if I put the windscreen back on, it should keep everything looking in proportion.
I have Rizoma's on my S2R1K, plus bar end mirrors.  I used a Tek mount for my GPS that threads into the stock mirror mount.  Didn't lower my gauges which I think looks fine with the Rizomas and if you are going to retain the windscreen.  The Rizoma clip-ons go above the triple, if not, then lowering the gauges I think would be in order.

http://ducatimonsterforum.org/index.php?topic=16736.msg343980#msg343980
Arne Berger
2007 S2R1K
2007 DL650
2005 DRZ400S

Punx Clever

Newest shipment of parts just in.  Stuff from motowheels!

But, before we begin that, I found my camera, and thus the pictures of installing the new exhaust.  Didn't start snapping till half way through the process, sorry guys!

Horizontal cylinder


Vertical cylinder


Collector


Right side of bike


Proof that I can handle a wrench


Thinking


Good side




Rear side


Bad side


Ok, the stuff from motowheels!

New right side carbon panel


Chop kit


Tail light and chop kit installed, the chop kit is a nice unit.  I highly suggest it, even though it costs more than it should


Clean wiring and resistor for turn signals


With the seat on, please excuse the moisture... the door to my "shop" had to be open.  You'll see why next.


My current shop... a 10x10 storage unit.  Not supposed to be working on a motor vehicle there, but since i'm not in florida yet, and don't have a garage, it'll have to suffice.


Almost forgot the side panel!



QuoteI had the unfortunate experience to need one.  Yes they do.  PJ's Parts, they don't list it, just email them.  While they are threaded, they also used some sort of crystalline glue stuff, so I had to use a big a$$ pipe wrench to get the old one off.

That would be loc-tight, and I'd assume they used red.

2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

corey

When all the land lays in ruin... And burnination has forsaken the countryside... Only one guy will remain... My money's on...

brent9632

#21
Quote from: corey on January 25, 2010, 05:29:12 PM
That's one sharp Futon.

The futon looks like a great place to sit while you tap those Chilled kegs [drink] [beer]
"Ride it like its your last"
-2007 S2R1000 red and white with carbon termis and DP CPU

He Man

will argon work instead of CO2?  :P lets tap that shit!

Punx Clever

The CO2 setup is in the apartment.

I swear, I have th bike hanging from a shop lift to put an exhaust on and all anyone sees is the floral pattern futon I got from my grandma.
2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

Speeddog

Quote from: Punx Clever on January 26, 2010, 02:08:49 AM
~~~SNIP~~~

I swear, I have th bike hanging from a shop lift to put an exhaust on and all anyone sees is the floral pattern futon I got from my grandma.

I was gonna ask, why the change from the very nice shop to the storage unit?
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Punx Clever

Very nice shop is my dads back in new mexico.  We built it to build a 40+ foot wheelbase twin-front axle rig up truck for the local oilfield industry.  I just finished up college here in Indiana and am waiting for may to roll around so i can move to florida and follow up on orders to go to flight school.  in the meantime, I'm stuck in an apartment complex with no garage for me, and i needed a shop and a place to store the bike while I worked on it.
2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

ducducgooseme

Hey amigo, when are you headed to flight school?  [thumbsup]

With your record at DITR, you are NOT allowed to bring a $100Million jet next year  :-* ;)
If you love your bike, set it free.
If it comes back to you, you've
probably high-sided.

Punx Clever

#27
Tell you what... I'll fly the plane into telluride and you bring Salt&Pepper for me to ride to Ouray :D

All kidding aside, I'm headed to florida at the end of april, early may.  I probably won't even be flying by august though... optimal time to take a week off over a weekend to head to the mountains, no?  I just need to make sure I have a bike rounded up in the area though.  I'm not sure how the navy would feel about me driving off to the killing grounds with my prime weapon of destruction in tow.  So i believe I'll fly out and maybe ride a slow ninja 250 or something... maybe i'll find a used sv to turn into a beater track bike.
2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

Punx Clever

Replacement seat came in.  $70+ shipping from Muskrat here on the boards.  Now when I get my old seat re-done I can have a touring-style seat and a regular one!


And a glamor shot over wolf creek:


And before I get hell for the couches in my apartment... it came furnished.  [coffee]
2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

Punx Clever

Forgot a picture... almost rider's view of bars as is right now:

2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST