Q for Barracuda Belly Pan Owners - M696/M1100 kit

[theprocess]

Did your kits come with 2 aluminum spacers but only 1 crankcase cover bolt? 

Correct me if I'm wrong but the front bolt from the left side (alternator side) crankcase cover gets replaced by the longer bolt included in the kit.  Thie pulled bolt is used to then replace the front bolt on the right side (clutch side) crankcase cover.  Leaving 1 short bolt unused.  So there isnt a missing bolt from the kit, it correctly includes only 1 long bolt.  The instructions are beyond crap that come with this kit.

Thanks in advance.

[Edward_Wolf]

Did your kits come with 2 aluminum spacers but only 1 crankcase cover bolt? 

Correct me if I'm wrong but the front bolt from the left side (alternator side) crankcase cover gets replaced by the longer bolt included in the kit.  Thie pulled bolt is used to then replace the front bolt on the right side (clutch side) crankcase cover.  Leaving 1 short bolt unused.  So there isnt a missing bolt from the kit, it correctly includes only 1 long bolt.  The instructions are beyond crap that come with this kit.

Thanks in advance.

Yes, that's the packet, I did get a new long bolt from a nearby shop. You do need 2 long bolts instead of 1. The Instructions suck a lot, but after installation the barracuda belly pan looks good on my bike. Now I am trying to paint it in a other color.

[theprocess]

Painful! 

Where do the metal washers go?  2 choices the way I see it.

A) Bracket - Metal washer - Rubber washer - Belly Pan - Bolt head

B) Bracket - Rubber washer - Belly Pan - Metal Washer - Bolt head

[theprocess]

Anyone?  I'm gonna go with the A configuration