Ok, I thought, this won't be so bad...shee-yeah...right!
I took the cans off my S4Rs and drilled the rivets on the inlet side out of the first one. The strap "sproinged" off and I thought "this is easy"...wrong.
The end cap refuses to separate from the sleeve.
I did what I usually do, which is come back to the forums searching for answers. I tried to use a plastic hammer to persuade the cap to come off and the only thing I managed was to put a couple of dents in the cap!
I toyed with the idea of just riveting the strap back on, but I now have a rattle caused by the drilled rivet ends inside the can!!
Can anyone offer suggestions on what I can do without inflicting more damage on my pipes???
Thanks, Frank