Ducati Monster Forum

powered by:

February 11, 2025, 11:26:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please Help
 
   Home   Help Search Login Register  



Pages: [1] 2   Go Down
  Print  
Author Topic: Oil/Fuel Stains on Engine Case  (Read 2285 times)
cakeman
Hero Member
*****
Offline Offline

Posts: 611



WWW
« on: November 20, 2010, 10:32:03 PM »

I have some oil and fuel stains on the engine cases as well as some grit/dust around the circumfrence of my open clutch, which i inherited when i bought my S4R, i have tried pretty much everything i can think of to get rid of it or to even get a little off, but to no effect.

Does anyone have any tips, tricks or suggestions, short of getting it resprayed.

Thanks
Logged

J5
Hero Member
*****
Offline Offline

Posts: 654


I'm here to fix zee fridge


« Reply #1 on: November 20, 2010, 11:26:05 PM »

no first hand experience

but if it wont wash off then you have to go further

i would look at some polishes

further from there either jiff or gumption creme cleansers

usual rules apply test on an inconspicuous spot , maybe bottom of the sump ?

iirc i read on a can of bon ami cleaner guarenteed not to scratch
Logged

i dont care if you have been a mechanic for 10 years doing something for a long time does not make you good at it, take my gf for an example shes been walking for 28 years and still manages to fall over all the time.
He Man
Post Whore
******
Offline Offline

Posts: 11626



WWW
« Reply #2 on: November 21, 2010, 10:40:15 AM »

ive had zero luck with getting oil stains of my engine, they are caked on there pretty good. I was going to strip it and repaint it with something thats more resistant to oil. cause whatever ducati uses is flaking off.
Logged

2006 Ducati S2R1100 Yea.... stunttin like my daddy CHROMED OUT 1100!!!!


Check out my Latest Video! 05/13/2017 :https://www.youtube.com/watch?v=P4xSA7KzEzU
Grrrly
Hero Member
*****
Offline Offline

Posts: 579


Industrial Grrrl


WWW
« Reply #3 on: November 21, 2010, 12:45:50 PM »

I don't know what you have used so far.  I've used some undiluted Citri-Solve (from my job, don't know brand) and it cleaned mine up with no scrubbing.  This stuff is probably the same as the citrus based Engine-Brite.  But again, I don't know what you have tried so far.

Best of Luck
Logged

vossy
South OZ
Hero Member
*****
Offline Offline

Posts: 1327


2007 S2R1000


« Reply #4 on: November 21, 2010, 02:10:50 PM »

Mag wheel cleaner does it for me. The only thing is that you need to rinse it down with water afterwards (with in a couple of minutes or so)otherwise you risk having the paint come off.

It got tar off my lower part of my engine case with ease.
« Last Edit: November 21, 2010, 03:37:51 PM by vossy » Logged

"Life's short" "Ride More"
mendoje
Full Member
***
Offline Offline

Posts: 104


« Reply #5 on: November 21, 2010, 02:28:46 PM »

Try clean gasoline, IME it easily dissolves baked and varnished oil.  Just be careful, dont be smoking or anything like that.
Logged

2003 M800Sie / 2004 BMW R1100S / 1981 BMW R100RS (Sold) / 1977 Kawasaki KE100 (1st Bike Smiley)
http://ducatimonsterforum.org/index.php?topic=27788.0
junior varsity
loves ze desmodromics.
Hero Member
*****
Offline Offline

Posts: 7355


GT1k, 99 M900(V), 98 M900(W), 00 M900S, 02 748E/R


« Reply #6 on: November 22, 2010, 06:34:58 AM »

Just be careful, dont be smoking or anything like that.

no fun
Logged

zooom
wishing I had some colorful enough tights for my
Post Whore
******
Offline Offline

Posts: 11905


when your gas is natural and has a name...


« Reply #7 on: November 22, 2010, 09:22:30 AM »

have you tried S100 or Castrol Super Clean Degreaser?
Logged

99 Cagiva Gran Canyon-"FOR SALE", PM for details.
98 Monster 900(trackpregnant dog-soon to be made my Fiancee's upgrade streetbike)
2010 KTM 990 SM-T
junior varsity
loves ze desmodromics.
Hero Member
*****
Offline Offline

Posts: 7355


GT1k, 99 M900(V), 98 M900(W), 00 M900S, 02 748E/R


« Reply #8 on: November 22, 2010, 09:26:23 AM »

'skrat gives the dirty parts a quick wipe down with denatured alcohol i think to get dirt and grime off when its fresh. his s4r has plenty of miles on it and looks clean enough to eat off of.  thats more preventative than damage control though
Logged

671M900
Sr. Member
****
Offline Offline

Posts: 378


« Reply #9 on: November 24, 2010, 05:03:52 AM »

I have a dremel carbon steel cup brush I use on my die grinder, very soft, takes a fair bit of effort to take off paint, but light pressure takes off stained oil and fuel for me.
Logged

671ducati.wordpress.com Record of Progress!
Mr Earl
Sr. Member
****
Offline Offline

Posts: 271


2003 M800 Dark


« Reply #10 on: November 24, 2010, 06:15:04 PM »

My bike had oil drip stains from the fill plug, and gas/carbon stains on the clutch cover from the old emissions tubes (don't ask), both of which defied every attempt and cleaning agent.  Until Simple Green.  For years I refused to try this stuff, thinking it was some ineffective biodegradable foo-foo crap.  But it works!  Rinse promptly and thoroughly, though, it's corrosive if left on for a while.
Logged

Leo Vince CF slip-ons, '01 SS900 fully adjustable Showa forks w/ST2 springs, rebuilt S4 shock w/Ohlins spring, 748 dog bone, Swatt clip-ons above the triple, Sargent seat, Duplicolor-Dark seat cowl, Rizoma grips, Techlusion TFI, SBK front fender, Evoluzione slave, BMC sport air filter, 14-tooth sprocket, Desmotimes caseguard, S2R side panels, Pantah belt covers, fake CRG LS mirrors, extra black zip-ties, right grip control imprint on tank, de-cannistered, Ducati Meccanica Bologna key ring
badgalbetty
Hero Member
*****
Offline Offline

Posts: 1139


its never too late to be who you might have been


« Reply #11 on: November 26, 2010, 08:57:40 AM »

total cycle cleaner S-100 is my cleaner of choice for road bikes. If you have stubborn stains a stiff bristle brush after you have sparayed the s-100 on will usually free up any krud. For dirt when I worked for Suzuki  many years ago, we used Westleys bleach white , but make sure you wash that crap off in zero seconds. It is very corrosive to plastics and alloys but boy does it get rid of dirt! waytogo
Logged

"Its never too late to be who you might have been" - George Elliot.
cakeman
Hero Member
*****
Offline Offline

Posts: 611



WWW
« Reply #12 on: November 27, 2010, 02:32:28 AM »

Ive attached a pic.... see the engine case in the right of the pick (under the clutch), it is very orange, yellow...... I was told today that it might be from the head of the oil INSIDE the case doing the damage to the exterior paint.........

Logged

battlecry
Hero Member
*****
Offline Offline

Posts: 669


On a silver black phantom bike...


« Reply #13 on: November 27, 2010, 06:11:24 AM »

Gosh, that orange takes the cake.  (Sorry cakeman)  Some Aluminum alloys have some documented porosity, mostly to gases, so that may be a stretch.  More than likely it is caused by lowest-bidder paint supplier to Borgo Panigale.  The heads in my 800 have similar burned paint around the exhaust ports.  
« Last Edit: November 27, 2010, 02:13:08 PM by battlecry » Logged
cakeman
Hero Member
*****
Offline Offline

Posts: 611



WWW
« Reply #14 on: November 27, 2010, 01:15:42 PM »

Gosh, that takes orange the cake.  Some Aluminum alloys have some documented porosity, mostly to gases, so that may be a stretch.  More than likely it is caused by lowest-bidder paint supplier to Borgo Panigale.  The heads in my 800 have similar burned paint around the exhaust ports. 

So is there anything i can use to fix/minimise the discolouration?
Logged

Pages: [1] 2   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1