Uber modz

toudg

Jr. Member

Offline

Posts: 74

Uber modz

« on: March 21, 2011, 07:00:53 AM »

Hehehe ok, this has to be the worst mod ever but i just *CANT* find some frame bushings (to complete my tailchop). I've lost both of them during my ride saturday. I went to my local Home Depot, Rona, etc without any luck. I think I'll order some online ... anyone has a link ? THANKS !! bang head


	Logged

Punx Clever

It never got strange enough for my
Hero Member

Offline

Posts: 1447

Re: Uber modz

« Reply #1 on: March 21, 2011, 07:28:42 AM »

McMaster-Carr:

http://www.mcmaster.com/#push-in-plugs/=bj3oo5

Looks like you can buy em in packs of 100... but it's less than 10 bucks. Think of it this way, you won't have to worry about replacing them if they come out Cheesy


	Logged

2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over. - HST

gr1976

Full Member

Offline

Posts: 119

Re: Uber modz

« Reply #2 on: March 21, 2011, 08:55:40 AM »

I just picked up some 1" black plastic plugs at my local Ace that fit perfectly after a couple of light mallet wacks. If you have an Ace check them out mine has much more oddball hardware than the big home improvement stores.


	Logged

toudg

Jr. Member

Offline

Posts: 74

Re: Uber modz

« Reply #3 on: March 21, 2011, 09:19:56 AM »

Right size is 1 inch ? Sorry to bother again hehehe, im at my job =).


	Logged

671M900

Sr. Member

Offline

Posts: 378

Re: Uber modz

« Reply #4 on: March 21, 2011, 02:07:28 PM »

Quote from: toudg on March 21, 2011, 09:19:56 AM

Right size is 1 inch ? Sorry to bother again hehehe, im at my job =).

Try some cheap handlebar ends. I was goofing around one time and the bar ends from my cyclecat clipons fit as frame plugs.


	Logged

671ducati.wordpress.com Record of Progress!

corey

Is that a throttle tube in your pocket? Or just your
Hero Member

Offline

Posts: 2799

'06 Tang/Black S2R800

Re: Uber modz

« Reply #5 on: March 21, 2011, 04:26:43 PM »

14 gauge shotgun shells are the best. spent casings, obviously Wink


	Logged

When all the land lays in ruin... And burnination has forsaken the countryside... Only one guy will remain... My money's on...

gr1976

Full Member

Offline

Posts: 119

Re: Uber modz

« Reply #6 on: March 21, 2011, 05:28:37 PM »

Quote from: toudg on March 21, 2011, 09:19:56 AM

Right size is 1 inch ? Sorry to bother again hehehe, im at my job =).

the 1" matched the o.d. of the frame tube best...like i said i had to tap them in with a rubber mallet but they are not coming out and look factory...they were $1.50 for the pair.....

they look like this

http://www.designworldonline.com/uploads/Imagegallery/JW-Winco-Plastic-Tube-End-Plugs-1.jpg


« Last Edit: March 21, 2011, 05:32:04 PM by gr1976 »	Logged

Pages: [1] Go Up

« previous next »