M620 Rear sliders for hollow axle

[Syscrush]

Hey folks, I'm a bit confused.  I don't see anyone selling rear axle sliders for the M620, but it's got a hollow rear axle so it should be a piece of cake.  We've got R&G sliders on the front axle and R&G makes a rear axle slider for other bikes, so I'm confused why I can't find rear sliders for the M620.

What am I missing here?

Ideally I'd like to find something that fits in the rear axle and incorporates spools for easy use with a rear stand, but I can't find anything like that.

Any ideas or pointers on something that could be made to work?

Thanks,
Phil.

[Syscrush]

I found these for several different Ducati flavors with conventional swingarm and hollow rear axle.  This is exactly what I want - it seems to me that if I can find something with the same diameter hollow axle (or bigger) and the same axle length (or longer), then it wouldn't be hard to fit them to the 620:

Rear Axle Spool Sliders

If I order something with a larger dia than the 620's axle, then it's a straightforward matter to turn them down on a lathe, and similarly cutting down the rod that runs through the axle isn't that complicated.  For me, the real question is how come nobody is making such a project for the bike?  Or why can't I find it if they are?

[battlecry]

I've dropped my bike a few times and I don't recall that area touching anything.  Maybe you don't see them because they are not needed? 

YMMV and all that.

[Speeddog]

Perhaps this sentence from that link may explain why:

***** Important! Not recommended for models with the low mount exhausts as the spools will interfere with the exhaust when the shocks are at the extremity of their travel.

[Syscrush]

***** Important! Not recommended for models with the low mount exhausts as the spools will interfere with the exhaust when the shocks are at the extremity of their travel.

Well, duh.  Thanks!

[Syscrush]

The bike is at the fab shop now having some spools added so it'll work with my rear lift/stand.  Thanks Speeddog for the clarification.

[Speeddog]

You're welcome, glad it's working out for you.