Main Menu

Offset Front Sprocket (In Search of...)

Started by junior varsity, June 23, 2011, 01:59:47 PM

Previous topic - Next topic
Print
Go Down Pages1 2 3
User actions

junior varsity

June 23, 2011, 01:59:47 PM
I'm looking for an offset front sprocket - 520 pitch, 14 tooth, plate & two-bolt fastening style, with offset to move teeth further out laterally from shaft...

Not sure where to begin looking really, any ideas?

Speeddog

#1
June 23, 2011, 02:55:16 PM
How far?
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

junior varsity

#2
June 23, 2011, 03:12:12 PM
It looks just like this little guy:


junior varsity

#3
June 23, 2011, 03:13:10 PM
which should be suspiciously familiar as belonging to this kit

DarkStaR

#4
June 23, 2011, 03:14:08 PM
Machining the area where the plate mounts should give more offset, but would suck to do every time you have to replace the sprockets.

EDIT: I typed too slow...

stopintime

#5
June 23, 2011, 03:14:57 PM
Buy the kit  ;D
252,000 km/seventeen years - loving it

junior varsity

#6
June 23, 2011, 03:17:25 PM
i've got everything but the front sprocket...

stopintime

#7
June 23, 2011, 03:21:55 PM
Quote from: j v on June 23, 2011, 03:17:25 PM
i've got everything but the front sprocket...

Like I said - buy the kit  8) The other parts will be spares....

Tell us about the swinger, please
252,000 km/seventeen years - loving it

Ddan

#8
June 23, 2011, 04:03:43 PM
Check with Chris Kelly, the front sprocket for a '00-'01 M900 is offset, it might work for you
2000 Monster 900Sie, a few changes
1992 900 SS, currently a pile of parts.  Now running
                    flogged successfully  NHMS  12 customized.  Twice.   T3 too.   Now retired.

Ducati Monster Forum at
www.ducatimonsterforum.org

junior varsity

#9
June 23, 2011, 04:20:22 PM
Interesting... Will do.


Quote from: stopintime on June 23, 2011, 03:21:55 PM
Tell us about the swinger, please

Not much to share I fear - its a Febur unit, replaces the rocker and hoop with a different billet rocker and ride height rod, uses small-axle rear wheel (916/748, Hyper, 848, S*R, etc).  Its black.   It may or may not be a direct fit.

junior varsity

#10
June 23, 2011, 04:26:35 PM
Quote from: Dan on June 23, 2011, 04:03:43 PM
Check with Chris Kelly, the front sprocket for a '00-'01 M900 is offset, it might work for you

I will have to contact him, the ones pictures are 'offset' the wrong way. I need one that is "dished" for lack of a better word.

ducpainter

#11
June 23, 2011, 04:30:09 PM
Quote from: j v on June 23, 2011, 04:26:35 PM
I will have to contact him, the ones pictures are 'offset' the wrong way. I need one that is "dished" for lack of a better word.
Like Speeddog asked...

how far?
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


junior varsity

#12
June 23, 2011, 04:35:59 PM
two smidges, one skoatch.   got to figure out a good way to measure this. (ideas?)

ducpainter

#13
June 23, 2011, 04:39:14 PM
Quote from: j v on June 23, 2011, 04:35:59 PM
two smidges, one skoatch.   got to figure out a good way to measure this. (ideas?)
Install the swinger and a standard front sprocket and use a straight edge to measure.

Then have a sprocket machined with the dish. ;)
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


stopintime

#14
June 23, 2011, 04:39:53 PM
252,000 km/seventeen years - loving it
Print
Go Up Pages1 2 3
User actions