Risers for Ducati Monster 696 (2009)

[majello]

Hey guys,
I just ordered the 1.5 inch risers for my duc 696 (see here http://compare.ebay.com/like/160623483156?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y).

I wonder if anybody has any experience with it. Is it simple to mount it ? E.g. do I have unscrew/screw 4 screws? of there is any cable that needs to be rearranged or holes to be drilled.
Your experience would be valuable!
thanks
Marco

[TWDucfan]

I am interested to know as well. 

[justinrhenry]

i've never put risers on a 696, but i have on other bikes.  in my experience it's just unscrewing and screwing.  no wire adjustments should be necessary unless you purchased some ape hanger risers. 

[Dave R]

that is a stock Ducati part from a 2010/11 model.  We've installed a few, fairly straight forward, put a rag on your tank to protect it, loosen clamps and remove bolts then replace with new pieces. 

[TWDucfan]

that is a stock Ducati part from a 2010/11 model.  We've installed a few, fairly straight forward,

Air intake recess on tank allow handle bar to make maximum turn. Will Raise the bar height by installing bar riser cause interference with tank? thanks.