Flea bay CNC Sprocket Covers

dan_t

Full Member

Offline

Posts: 233

Flea bay CNC Sprocket Covers

« on: August 21, 2011, 07:43:31 PM »

Hi all,

Does anyone have any experience with these particular items (fit, quality etc)?

http://www.ebay.com.au/itm/Ducati-Sprocket-Cover-748-848-916-996-998-1098-1198-S2R-/250845878892?pt=Motorcycles_Parts_Accessories&hash=item3a67945a6c

They appear to be an almost exact rip off of the EVR ones, but at a fraction of the cost.


	Logged

'08 S4rs;
Termis, DP C/F Short Tail, DP C/F Rear Hugger, Custom hand-made seat, Matris Steering damper, Pazzo Shorty Levers, Rizoma Dynamic mirrors, EVR Ventilated Pressure Plate, EVR Open Clutch Cover, SpeedyMoto Stainless Springs Kit, EVR Clutch Slave Cylinder, EVR Front Sprocket Cover, Evotech Performance Radiator & Oil Cooler Guards, Rizoma CT027R, CT017R & CT015R red fluid reservoirs, Powder Coated Rear Passenger Pegs, Oberon Racing Pegs, C/F Fairing stays, Oggy Knobs, ZG tinted Screen

DoWorkSon

Sr. Member

Offline

Posts: 458

Re: Flea bay CNC Sprocket Covers

« Reply #1 on: August 21, 2011, 07:47:36 PM »

Have one very similar on my bike... Fit/Finish is good... The anodizing sucked. Turned pink within a few weeks.. I just powdercoated it black and its been great ever since


	Logged

2003 BMW R1150GS- The commuter
2009 M696--SOLD

chiu

Full Member

Offline

Posts: 178

Re: Flea bay CNC Sprocket Covers

« Reply #2 on: August 22, 2011, 06:47:51 AM »

I have tried this one... can't fit on my M1100...Don't know why..
http://www.ebay.com/itm/Ducati-Monster-750-620-900-1000-CNC-Gold-Sprocket-Cover-/300589080441?pt=UK_Motorcycle_Parts&hash=item45fc815f79


	Logged

Slide Panda

Omnipotent Potentate
Post Whore

Offline

Posts: 10137

Personal Pretext

Re: Flea bay CNC Sprocket Covers

« Reply #3 on: August 22, 2011, 07:45:22 AM »

Quote from: chiu on August 22, 2011, 06:47:51 AM

Because they are for a 750, 620 ,900 etc. The engine case is different. Older monsters can share a lot of parts, as can newer. But mostly you won't be crossing the generation line


	Logged

-Throttle's on the right, so are the brakes. Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

ducatiz

No trellis. no desmo. = Not Ducati.
Post Whore

Offline

Posts: 15591

Re: Flea bay CNC Sprocket Covers

« Reply #4 on: August 22, 2011, 08:09:44 AM »

I have bought stuff from the seller and he's a good guy. Returns are no problem. Email him with questions, he is very courteous.


	Logged

Check out my oil filter forensics thread! Offended? Click here
"Yelling out of cars, turning your speakers out the window to blast your music onto the street, setting off M-80 firecrackers, firing automatic weapons into the air—these are all well and good. But none of them create a merry atmosphere of insouciance and bonhomie quite like a revving motorcycle.

speedknot

Sr. Member

Offline

Posts: 358

If a Honda= rice burner, then what is a Ducati?

Re: Flea bay CNC Sprocket Covers

« Reply #5 on: August 23, 2011, 04:45:48 PM »

+1 on the recommendation. I bought the black one for my bike. The only thing I didn't like was that it has a high gloss finish. It doesn't go with the rest of the flat black parts. I'll eventually spray it flat black.


	Logged

2001 Duc M750, Harley Forty-Eight, 1976 Honda CB400F-SS, 1975 CB360T

Mugen939

Jr. Member

Offline

Posts: 81

Re: Flea bay CNC Sprocket Covers

« Reply #6 on: August 25, 2011, 05:30:35 AM »

Quote from: dan_t on August 21, 2011, 07:43:31 PM

I bought these for my Monster EVO and they didn't fit. Just an FYI.


	Logged

Heath

Hero Member

Offline

Posts: 1467

Re: Flea bay CNC Sprocket Covers

« Reply #7 on: August 25, 2011, 07:11:31 AM »

Quote from: Mugen939 on August 25, 2011, 05:30:35 AM

I bought these for my Monster EVO and they didn't fit. Just an FYI.

It doesn't list your bike on the list of bikes it will fit. Not sure why you would order it. He has another auction for the 696, 1100, 1100s. Again though no EVO is listed so I would be careful on ordering that one too.


	Logged

2007 Ducati Monster S4RT
2006 Ducati Monster S2R800 Dark [sold]

Mugen939

Jr. Member

Offline

Posts: 81

Re: Flea bay CNC Sprocket Covers

« Reply #8 on: August 25, 2011, 12:54:03 PM »

It says all years monsters in the description. That's why I ordered it. Thought my monster fell under the category of "all years". chug

"Payment Options:
PayPal Only
Shipping & Handling:
Shipping is done Monday through Friday. If payment is taken before 2pm, your item will be shipped out the same day. We use USPS. Approximate delivery time is 2-3 business days for domestic. For global shipping, approximate delivery time is 5-15 business days.
Fitment:

●748 / 916 / 996 / 998 (all years)
●749 / 999 (all years)
●848 / 1098 / 1198 (all years)
●ST / SS / Multistrada (all years)
●851 / 888 (all years)
●ST2 / ST3 / ST4 / S4 / S2R/ S4R / 620 / 695 / Monster (all years)"


	Logged

Pages: [1] Go Up

« previous next »