Ti Monster Frame*Completed Pics*Headed for DucStock

avizpls

TECH
Hero Member

Offline

Posts: 529

Re: Ti Monster Frame

« Reply #45 on: August 24, 2011, 03:23:13 PM »

What's it called when you're intensely jealous to the point nearing anger?

That's pretty awesome. I dream of being at this level of, but alas I'm only in the process of learning my mig whilst saving for a tig. So I have to ask: is this type of thing near your profession or entirely a hobby?


	Logged

#11

ducpainter

The Often Hated
Flounder-Administrator
Post Whore

Offline

Posts: 78855

DILLIGAF

Re: Ti Monster Frame

« Reply #46 on: August 24, 2011, 04:24:57 PM »

Quote from: RMartin on August 24, 2011, 02:05:41 PM

OK, I'll try to answer some of the questions:

Is it rigid enough: I think so. The main tubes from the head to the engine mounts are 1.25" and the wall is .005" thicker than the stock frame. Ti is stronger than steel but a little more flexible so you can't just substitute Ti for steel and get the same stiffness. I also had all of the gussets cut with a water jet from 1/8" plate.

VIN#: In the state of Kansas I just have to have it inspected by the Highway Patrol and they will issue a new VIN#. If I want to sell the frames I need to issue a MSO. There is no federal regulation on frames, it is up to each state. Some states require that the MSO come from a bonded company. In Kansas all you need is a bill of sale to get a VIN# for a frame. I have found a company that will sell you VIN#'s for frames. It's $1,400 for the first VIN and $200 for each one after that.

DucPainter:The frame was not welded in a chamber. I used a gas lens in the torch and 10 seconds post purge with UHP Argon. I only welded 3/4 to 1" at a time to stay within the coverage of the gas lens. I also injected argon inside the tube in the places that I could. If you look close in the picture below you can see where I screwed a fitting into the jig to purge the inside of the head tube. That head tube is machined from a piece of Ti pipe, not a thin piece of tube with an aluminum insert.

IMO,pictures usually make welds look worse than they actually are,especially on shiny metal.

The frame was not beadblasted.I buffed the weld area off with a Scotchbrite wheel and then sanded with some 320 paper and then a Scotcbrite pad. A thin coat of WD-40 makes it look nice.

I was wondering how you removed the discoloration.

There would be some with even a ten second post flow.

The Ti pipe is the expensive way to do it. waytogo


	Logged

"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
perspective
is even more amazing than yours."
To realize the value of nine months:
Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”

thought

Everyone needs a
Hero Member

Offline

Posts: 2366

Re: Ti Monster Frame

« Reply #47 on: August 24, 2011, 04:29:38 PM »

Quote from: avizpls on August 24, 2011, 03:23:13 PM

What's it called when you're intensely jealous to the point nearing anger?

a duc owner that's looking this frame haha


	Logged

'10 SFS 1098
'11 M796 ABS - Sold
'05 SV650N - Sold

Monsterlover

The best kind of whore is a
Post Whore

Offline

Posts: 18377

I will save Skynet from Sarah Connor

Re: Ti Monster Frame

« Reply #48 on: August 24, 2011, 04:31:44 PM »

I approve of this frame.


	Logged

"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST **"A man who works with his hands is a laborer. A man who works with his hands and his brain is a craftsman. A man who works with his hands, brains, and heart is an artist." -Louis Nizer**

Düb Lüv

ASE master internet mechanic
Hero Member

Offline

Posts: 989

Re: Ti Monster Frame

« Reply #49 on: August 24, 2011, 05:09:07 PM »

Quote from: Travman on August 24, 2011, 10:27:34 AM

Beautiful. applause

ArcFab (Doug Cook) used to make Ti frames for Supersports.

i though about buying somebodies ARC Ti frame but i kinda didn't like the weird redesign he did by the headtube. i sure it was partially due to not having any bent/angled tubes. all straights. i would love to own a ti or aluminum monster frame and Rmartin's has the cleanest one i've seen hands down. i'm eager to see a price on the final product if he's going to sell and i'm not saying just to harass the guy. can't rush perfection.

it'd be awesome if Rmartin is going to be at indy GP.


« Last Edit: August 24, 2011, 05:29:11 PM by Düb Lüv »	Logged

Building, building, building

Syscrush

Full Member

Offline

Posts: 240

Re: Ti Monster Frame

« Reply #50 on: August 24, 2011, 06:04:46 PM »

Wow. Watching with interest.


	Logged

Punx Clever

It never got strange enough for my
Hero Member

Offline

Posts: 1447

Re: Ti Monster Frame

« Reply #51 on: August 24, 2011, 07:07:52 PM »

thats a nice looking jig you've built there.


	Logged

2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over. - HST

Arachnosold1er

Jr. Member

Offline

Posts: 78

Re: Ti Monster Frame

« Reply #52 on: August 24, 2011, 09:17:31 PM »

Holy Sh*t! That is AMAZING!!!! I work with Ti on airplanes and it can be a dog. I wonder how much of a difference bead blasting would make? Not only in the appearance but the actual structural strengthening and stress relief that bead blasting has on metal. applause


	Logged

2011 M796 ABS
Evotech tail tidy, Woodcraft 2" rise clip ons, Arrow Dark slip ons.
"Well we're not just gonna let you walk outta here."
Bad Guy: "Who's "we" sucka?"
"Smith, and Wesson, and me."-Clint Eastwood-

Drunken Monkey

Scooter-Trash
Flounder-Administrator
Hero Member

Offline

Posts: 3405

Re: Ti Monster Frame

« Reply #53 on: August 24, 2011, 10:52:15 PM »

I think everyone else has used up all the superlatives, so I have nothing left to add

except...

can you teach me to weld that good? Grin


	Logged

I own several motorcycles. I have owned lots of motorcycles. And have bolted and/or modified lots of crap to said motorcycles...

zarn02

Hero Member

Offline

Posts: 2642

Re: Ti Monster Frame

« Reply #54 on: August 24, 2011, 11:42:13 PM »

Quote from: RMartin on August 24, 2011, 02:05:41 PM

VIN#: In the state of Kansas I just have to have it inspected by the Highway Patrol and they will issue a new VIN#. If I want to sell the frames I need to issue a MSO. There is no federal regulation on frames, it is up to each state. Some states require that the MSO come from a bonded company. In Kansas all you need is a bill of sale to get a VIN# for a frame. I have found a company that will sell you VIN#'s for frames. It's $1,400 for the first VIN and $200 for each one after that.

Holy crap! Another forum member from my state!

That must make a whole three or four of us here...


	Logged

"If it weren't for our gallows humor, we'd have nothing to hang our hopes on."

The Mad King Pepe'

The Fifth Element was created from my
Hero Member

Offline

Posts: 2279

Re: Ti Monster Frame

« Reply #55 on: August 25, 2011, 06:41:04 AM »

Great work, I really love/engy it! waytogo

Quote from: RMartin on August 24, 2011, 02:05:41 PM

So, have you put any thought in making a few more frames and sellling them? Evil


	Logged

First they came for the Socialists, and I did not speak out-- Because I was not a Socialist.
Then they came for the Trade Unionists, and I did not speak out-- Because I was not a Trade Unionist.
Then they came for the Jews, and I did not speak out-- Because I was not a Jew.
Then they came for me--and there was no one left to speak for me.

take risks

She gagged on my
Full Member

Offline

Posts: 177

you can go faster

Re: Ti Monster Frame

« Reply #56 on: August 25, 2011, 12:30:09 PM »

words are useless!

chug


	Logged

2000 VFR 800 - wrecked
2007 Ducati Monster 695

Randy@StradaFab

Sr. Member

Offline

Posts: 308

Re: Ti Monster Frame

« Reply #57 on: August 25, 2011, 12:42:09 PM »

Zarn - Where are you located in Kansas?


	Logged

Randy@StradaFab

Sr. Member

Offline

Posts: 308

Re: Ti Monster Frame

« Reply #58 on: August 25, 2011, 12:47:28 PM »

Yes, they will be for sale, just not quite ready to let the whole cat out of the bag yet.


	Logged

DRKWNG

Local Moderator
Hero Member

Offline

Posts: 5136

Re: Ti Monster Frame

« Reply #59 on: August 25, 2011, 12:51:57 PM »

I dare you to make a frame for a Sport1000. Evil


	Logged

And the sugar fountain fairy swore so hard when she came to super-size that stale hope soybean; liiiike a homeless German woman. Who is this super-sizing spirit-crushing femme? And tell her I'll break a tree root up in her shrimp.

Being faster than you thought possible…it feels good. No, screw that—it feels like shotgunning a gallon of adrenaline and chasing it with an all-night orgy aboard a burning Viking boat.

Pages: 1 2 3 [4] 5 6 ... 14 Go Up

« previous next »