The power of orange compels you!

Started by Monsterlover, November 20, 2011, 06:35:04 PM

Previous topic - Next topic

Monsterlover

Your parts came from an adventure?
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Monsterlover

My project is moving along.

Warp9 sent the correct brake caliper carrier on the third try but now my spedo doesn't work. The pickup seems half covered by a diameter on the rotor. 

Or maybe the spacing isn't close enough. Ill have to investigate.
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

lethe

Quote from: Monsterlover on April 01, 2012, 01:57:29 PM
Your parts came from an adventure?
I thought they did but looking at pics, I'm thinking not. I believe the bike was a frankenstein having been rebuilt once before the latest wreck. The kid does have an R title for it that he's going to give me once he finds it.
doesn't matter, it's still a bunch of worthwhile parts
'05 Monster 620
'86 FZ600
'05 KTM SMC 625

Monsterlover

"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

lethe

'05 Monster 620
'86 FZ600
'05 KTM SMC 625

Slide Panda

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Monsterlover

CRAP [bang]

I just messed up a perfectly good sidestand.  It's repairable but still.  :(

I found a used stand from a 525, bought it and machined it to fit the bits from my 450 exc stand.  The 525 has some angle to it (and I cut an inch out of it) so when I have my sumo wheels on it should put the bike at a decent angle.

The foot is pressed in.  I got it out and as it was allllllmmost back into place after the sectioning it snapped off.

I drilled it out and now have to come up with something to be a new foot for the side stand.  I'll see if the dealer sells them on their own or if I have to make one out of aluminum I'll do that.

This is one of those projects I thought would go well.  And in the middle of it, I thought "it's going well.  Shit, don't think that, we're not done with it yet. . ."
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Slide Panda

I hear you've got a pretty good tool set. That so?

Not an option for you, but I just tossed some cash at that issue for my bike - the side stand for the SMC is around 1" shorter than the Enduro and was an early purchase as with the 17's and E stand the bike was almost upright.

So I've been getting down with some tune work - got the cables and such for uploading maps and such. Though it's no cusyom Dyno tune the tweaked slip-on map I uploaded is way better feeling than the stock.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Monsterlover

Good tool set?  lol, yes.

My dealer said to just get the stand from the 450smc as it was shorter but I didn't want to spend 100 on it.

I engineered a workaround for my problem.  Should be fixed shortly.

If you want their number, my dealer has done extensive work on the 690 engine for mapping.  One of the service guys has a 690e and has it running like you poured espresso into a Jack Russel.  They would probably share the map.  I know they were asked by KTM to share it with them. . .
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Slide Panda

Question is what's he got going on besides the map. It's not uncommon for folks to have some flavor of the 'EVO' kit. The EVO 1 has a different intake set up, the 2 hops up to a (gigantic) pod, and new cam.

Can't hurt to talk to them though - drop a PM on me?
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Kopfjager

This is what's on my Duke 690 (654) Dyno tuned with a Bazzaz.


Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

Monsterlover

So I just got back from my first ride on the 450sm

I only need four words to describe it.

It.

Is.

The.

DEBIL!!!

It has no guts above 75 the way its geared.

0-60 range its pretty well untouchable.

One I get more in tune with it that is [evil]
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Slide Panda

Working it up to be a StupidMoto too?

Hmmm, just had a thought... wonder if a rear brake link like this
https://tpoparts.com/cat093/index.php?route=product/product&keyword=brake&category_id=0&product_id=152
would work on the KTM. Hmmm

I've got the lever positioned about as low as it'll go and it's still near level with the pegs. Makes hitting the brake w/o lifting my foot off problematic. And to get it there I had to replace the stock stop bolt with something longer from my spares bin..
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Monsterlover

"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Slide Panda

Stoopid indeed - I was just about to say you should come down here for the SuperMoto track day at summit point. But it appears management has changed and the new boss doesn't wish to do a SuMo day at the kart track. bah
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.