Ducati Monster Forum

powered by:

December 29, 2024, 08:58:24 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Tapatalk users...click me
 
   Home   Help Search Login Register  



Pages: [1]   Go Down
  Print  
Author Topic: Questions about my new Termi kit...  (Read 2525 times)
rbarrero
New Member
*
Offline Offline

Posts: 5


« on: June 27, 2008, 10:24:30 AM »

Hi;

After having some seemingly standard issues with my new '07 Monster 695 (Dark), I decided it would be great to install the Termi kit everyone keeps talking about. Very expensive, but so very worth it.

Now, I have two questions:

1. How do I find out if the dealer unplugged the oxygen (o2) sensor? Is it still required with the new DP ECU?
2. What's with this drain tube I've never seen before hanging kinda loose?

Thanks!

Rafael
Logged
Slide Panda
Omnipotent Potentate
Post Whore
******
Offline Offline

Posts: 10137


Personal Pretext


« Reply #1 on: June 27, 2008, 11:04:06 AM »

1.  I don't know.  The two monsters I've had were pre 02 sensors

2.  IF it's black, it's probably the tank vent/breather.  They may have removed your tank to better get at your ECU and when they put it back they didn't put that hose back exactly where they found it. 

IF it's clear, that's from the battery - but the same logic applies. 

Just have a look around and find a route than makes you happier.

 
Logged

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.
CairnsDuc
Guest
« Reply #2 on: June 27, 2008, 12:54:26 PM »


Easiest way is to get down and have a quick look all over your Exhaust, see if you can spot a sensor coming out of the Exhaust/Header pipe with wires coming out of it.

If no, then your Exhaust sensor is gone.

My 07 S2R 800 came with a Sensor, But when they cracked open the shipping crate for my bike the first thing the Head Mechanic did was remove it and throw it in the bin. He is now in the habit of remove it before he even starts any new S2R series bike, plug in his Ducati computer, tell the computer it's not there, all problems solved.

It's never popped or farted on Decel and runs fine (The bike I'm referring to, The owner on the other hand...)
Logged
CDawg
Hero Member
*****
Offline Offline

Posts: 1468

S4RS


« Reply #3 on: June 27, 2008, 12:57:38 PM »

My 07 S2R 800 came with a Sensor, But when they cracked open the shipping crate for my bike the first thing the Head Mechanic did was remove it and throw it in the bin. He is now in the habit of remove it before he even starts any new S2R series bike, plug in his Ducati computer, tell the computer it's not there, all problems solved.

It's never popped or farted on Decel and runs fine (The bike I'm referring to, The owner on the other hand...)

What does the Mechanic do to get around the yellow check engine light on the instrument cluster?
Logged
teddy037.2
Guest
« Reply #4 on: June 27, 2008, 01:22:32 PM »

2. What's with this drain tube I've never seen before hanging kinda loose?

where is this tube?

if you bought the high pipe kit, they will have removed your emissions can to make room for the S pipe on the right side. instead of linking the two lines from the tank, they may have just left them seperate.
Logged
somegirl
crazy bike girl
Hero Member
*****
Offline Offline

Posts: 9777


aka msincredible


« Reply #5 on: June 29, 2008, 07:11:06 PM »

You can see my O2 sensor here:



The dealer should remove it with the new DP ECU.

And I agree with Teddy on the hose, I think it is from removing the emissions canister.
Logged

Need help posting pictures?  Check out the photo FAQ.
tristantumble
Full Member
***
Offline Offline

Posts: 220


« Reply #6 on: June 30, 2008, 09:18:06 AM »

i'm confused. msincredible you have the termis on and still have that cable? i'll be getting it done this week, so should that cable be unhooked from that lower pipe?

thanks.
TT
Logged

07.695 (sold)
07. sport 1000 biposto
somegirl
crazy bike girl
Hero Member
*****
Offline Offline

Posts: 9777


aka msincredible


« Reply #7 on: June 30, 2008, 10:42:57 AM »

Sorry for the confusion.  The picture was taken after I put the pipes on but before I had the shop install the new ECU.  The O2 sensor is now disconnected.
Logged

Need help posting pictures?  Check out the photo FAQ.
tristantumble
Full Member
***
Offline Offline

Posts: 220


« Reply #8 on: June 30, 2008, 12:16:41 PM »

Sorry for the confusion.  The picture was taken after I put the pipes on but before I had the shop install the new ECU.  The O2 sensor is now disconnected.

ahh, i see thanks for clearing that up msincredible!
Logged

07.695 (sold)
07. sport 1000 biposto
somegirl
crazy bike girl
Hero Member
*****
Offline Offline

Posts: 9777


aka msincredible


« Reply #9 on: June 30, 2008, 04:33:31 PM »

BTW my Dyno results are here: http://ducatimonsterforum.org/index.php?topic=1819.0
Logged

Need help posting pictures?  Check out the photo FAQ.
CairnsDuc
Guest
« Reply #10 on: June 30, 2008, 08:31:06 PM »

Cdawg, He plugged in his Ducati Adjustment computer into the ECU, told it the ECU it now had no Oxy sensor
He said the ECU in my bike was part of a new design they were sending through with easy map adjustment/replacement.

He did that before they even started the bike for the first time when received from the Importer.

They do it on all the 2 valve monsters since the new ECU's started to trickle through to them from December last year.

Never had a problem from day 1, so must have worked!
Logged
CDawg
Hero Member
*****
Offline Offline

Posts: 1468

S4RS


« Reply #11 on: July 01, 2008, 06:27:44 AM »

Cdawg, He plugged in his Ducati Adjustment computer into the ECU, told it the ECU it now had no Oxy sensor
He said the ECU in my bike was part of a new design they were sending through with easy map adjustment/replacement.

He did that before they even started the bike for the first time when received from the Importer.

They do it on all the 2 valve monsters since the new ECU's started to trickle through to them from December last year.

Never had a problem from day 1, so must have worked!
Very interesting!  Thanks for the tip!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1