Ducati Monster Forum

powered by:

October 31, 2024, 03:51:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the DMF
 
   Home   Help Search Login Register  



Pages: [1]   Go Down
  Print  
Author Topic: hydraulic Banjo Brake Light Pressure Switch  (Read 1006 times)
TitanMonsterS4R
Hero Member
*****
Offline Offline

Posts: 1740


Yup, it's supposed to sound like that....


« on: October 22, 2012, 05:50:11 AM »

Need to install a banjo brake switch to work with the new Ducabike rearsets I purchased.  Never done it before, how easy is the job? Installation
« Last Edit: October 22, 2012, 07:02:24 AM by MonstaS2R » Logged

06 Monster S4R - Red/Black Final Edition
Slide Panda
Omnipotent Potentate
Post Whore
******
Offline Offline

Posts: 10137


Personal Pretext


« Reply #1 on: October 22, 2012, 06:52:06 AM »

EASY!

Just get a two wire AMP Superseal connector to terminate the wires and it hooks right in. Obviously you're in for a brake bleeding session as part of it, but it's no harder than that.
Logged

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.
TitanMonsterS4R
Hero Member
*****
Offline Offline

Posts: 1740


Yup, it's supposed to sound like that....


« Reply #2 on: October 22, 2012, 03:06:04 PM »

EASY!

Obviously you're in for a brake bleeding session as part of it, but it's no harder than that.

Stupid question, but why must i bleed the rear brake after installing rearsets?
Logged

06 Monster S4R - Red/Black Final Edition
mmakay
Sr. Member
****
Offline Offline

Posts: 339


695


« Reply #3 on: October 22, 2012, 04:29:42 PM »

...can't replace the banjo bolt with a pressure switch without bleeding the brakes afterwards.
Logged

- Mickey
Slide Panda
Omnipotent Potentate
Post Whore
******
Offline Offline

Posts: 10137


Personal Pretext


« Reply #4 on: October 23, 2012, 04:07:33 AM »

^^^ That

You're removing the stock banjo and replacing it. Going to be a lot of air in the lines if you don't. So much the brake probably won't function at all, even to the point of not lighting up the brake light as you can't make sufficient pressure in the system
Logged

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.
TitanMonsterS4R
Hero Member
*****
Offline Offline

Posts: 1740


Yup, it's supposed to sound like that....


« Reply #5 on: October 23, 2012, 06:09:18 AM »

^^^ That

You're removing the stock banjo and replacing it. Going to be a lot of air in the lines if you don't. So much the brake probably won't function at all, even to the point of not lighting up the brake light as you can't make sufficient pressure in the system

Thanks. 

And knowing is half the battle....G.I. Joe's
Logged

06 Monster S4R - Red/Black Final Edition
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1