2012 Monster 696 chiming noise

Started by jrswanson1, May 20, 2013, 11:37:18 AM

Previous topic - Next topic

jrswanson1

Okay, the bike has close to 5000 miles on her, and I'm getting what sounds like a chiming sound, or more like some tinkling coming from the right side between 5000 and 6000 rpms.  The bike does not have to be in gear for the noise to manifest itself.  This started happening about a week ago.  Any ideas?

Raux

lose your fin pucks?
the little pieces that sit between the aircooling fins
they reduce vibration which causes noise. i have the same issue

jrswanson1

Damn annoying.  It's such a tinny noise, not what I would expect.  Thanks for the info.

jrswanson1

It's not the pucks, it's the heat shield on the exhaust pipe that's loose.  I need to find my metric hex key set to tighten that up.

jaxduc

I'm glad you figred this out.
I had this problem a couple of years ago and just decided to take the damn thing off since the nuts that hold the screw in place aren't worth a damn.
damn
Quote
Aren't you the Panigale hater?


scooterd145

I added some additional fiber washers on both sides as mine would work itself loose even though the bolts were tight.

Scott

jrswanson1

I need to replace mine anyway since it's messed up from my drop.  Would blue loctite work?

Slide Panda

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

jrswanson1

Awesome.  The screws won't go in any further, so either a washer came out or something.   If I find out someone has been messing with my bike I'm going to have to make an example of them.

Raux

there are 2 padded washers per bolt, they flatten over time.
get new ones

jrswanson1

Quote from: Raux on May 23, 2013, 01:17:22 PM
there are 2 padded washers per bolt, they flatten over time.
get new ones

The washers are gone, and the bike is less than a year old.   [thumbsdown]

Raux

Quote from: jrswanson1 on May 23, 2013, 01:24:43 PM
The washers are gone, and the bike is less than a year old.   [thumbsdown]

716.1.405.1A  is the part number I think


jrswanson1

My dealer is out of stock, but their sister store has 27 of them.  The heat shield requires four of the washers.  Anywho, I'm hitting the other store since it's near my office tomorrow.

Curmudgeon

Quote from: jrswanson1 on May 23, 2013, 09:21:18 PM
My dealer is out of stock, but their sister store has 27 of them.  The heat shield requires four of the washers.  Anywho, I'm hitting the other store since it's near my office tomorrow.
Just curious. Where are you in VA..., or is that NoVA?  8)
2011 796 ABS "Pantah" - Rizoma Bar, 14T, Tech Spec, Ohlins DU-737, Evaps removed, Sargent Seat, Pantah skins