Swingarm Modification

[tyler]

I have a 04 620 and i was wondering where i can find a single side swingarm to put on it, if any will even convert over to this model and year? i know just about nothing so all info is helpful

[Dirty Duc]

S*R will fit the case.

I don't know about the shock and linkage...

[slowkitty]

If you want to fit a 916 swing arm, you will have to grind down the engine mount because the case is too wide.  You will have to also cut the sub-frame and mount the pivot for the 916 shock.  Not difficult to do but the parts have to be found.

Not a mod that one would want to do now that the S2R are around.  It used to be done because there was no single swingarm monsters.

[Speeddog]

As Dirtyduc said, S*R will fit, and will worl with your existing shock and linkage.

You'll need the complete swingarm with eccentric and hub, sprocket carrier, brake rotor, wheel.
You'll need to get S*R speedo sensor or extend the wires on the one you have, and get a speedo-healer to compensate for 4 pulses/rev instead of 6.
S*R swingarm pivot shaft and footpeg assemblies would make it easier...sort of.

Still would need to sort out exhaust and passenger pegs.

A pretty involved project, but virtually all of the parts you need are already made.

[LowThudd]

Most of what you need: http://www.ebay.com/itm/DUCATI-MONSTER-S2R800-2007-Rear-Swingarm-Assembly-Suspension-Eccentric-Hub-/300912998582

[Speeddog]

Most of what you need: http://www.ebay.com/itm/DUCATI-MONSTER-S2R800-2007-Rear-Swingarm-Assembly-Suspension-Eccentric-Hub-/300912998582

That's  a good bit of it.

But WTF, ~29 days left on the auction?

[LowThudd]

That's  a good bit of it.

But WTF, ~29 days left on the auction?

Buy it now. It's not an auction.

[mikeb]

Given the price of used S2R 800's I'd sell the 620 and pick up an S2R.  Gotta figure used S2R's can be had for around $5k.  If you get just $3500 for your 620 you'd only be looking at a difference of $1500.  Add up swingarm, wheel, new rear tire, exhaust and footpeg mods, and you'd be hard pressed to do it for less than $1500.  Be cheaper to sell the 620 and get an 800.  With an 800 you'd get all that and more motor too.

[Slide Panda]

That's a salvage breaker business - they typically list stuff for BIN

FWIW they have the wheel too
http://www.ebay.com/itm/DUCATI-MONSTER-S2R800-2007-Rear-Wheel-Rim-17-x-5-50-SCRATCHES-/271214790675?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item3f25a94813

Looking over their stuff - there's a good bit of Duc stuff. Might be worth keeping track of

[SpikeC]

 Someone was looking for a fairing for an s*R and that guy has one for not too much.

[tyler]

thanks for the help