Spare part ideas/help please

[CJC900]

Hi Everyone,

I have not been on the forum for a few years ( damn work and other interruptions)

I had planned on heading off on the long weekend with friends down the NSW coast and had a new rear tyre fitted. When I refitted the wheel on the bike I was unscrewing the chain adjuster and it picked up a thread , jammed and snapped the allen head bolt. I have a mate who is a motor mechanic with a well fitted out workshop and we tried easy outs, heating the aluminium casting, swearing, etc but nothing worked.

It is a 95 M900 and I called Frasers but no part in Oz.

It is the aluminium casting that fits inside the swingarm and the axle passes through it.

Does anyone know any Ducati wreckers in Sydney or have an old part lying around?

Thanks in advance.
Cheers,


Con

[FIFO]

Give these guys a call http://www.ducati-gowanloch.com/

Or try  Dmoto take the part down there to Shaun he might be able to fix it ? or have an old one, they are very good on bikes   

 http://www.dmoto.com.au/

Cheers Sir Rob 

[OzzyRob]

Have you tried a burr in a drill press or trying to drill the bolt out ?

You'll probably have to have a helicoil or similar installed.

Give Ben Shaw at Extreme Creations a call, he's top bloke and nothing's too small or difficult.

http://www.extremecreations.com.au/index.asp

 

[CJC900]

Thanks for all of the replies and emails everyone.

I will give the suggestions a try and let you all know how I go.

Cheers,

Con

[Betty]

Metropolitan out on Silverwater Road 'wreck' Ducatis:

http://www.motorcyclewreckers.com/index.php?route=information/contact

[OzzyRob]

Metropolitan out on Silverwater Road 'wreck' Ducatis:

http://www.motorcyclewreckers.com/index.php?route=information/contact

Ask for Mick, he's pretty switched on, that's if he's around or still there...he comes and goes.

[loony888]

where abouts are you mate? i have a NOS one in my shed if you need it?

paul.

[CJC900]

Hi All,

This is why I like this forum, everyone helps everyone else.

Hi OzzyRob ,

Mick lives out Appin way, we have been on rides in the past. I haven't seen him on the forum for a while. - it is not bushfire season so he can't blame that. Probably busy with life like the rest of us ( any free time used for riding!!!!).
 
Hi loony888,

I am near Campbelltown so pretty close to where Mick lives. Where are you-how much do you want for the part?

Cheers,

Con

[OzzyRob]

I always thought Mad Mick was a true blue GSXR rider.......what he doesn't know about gsxr's isn't worth knowing.

[loony888]

i'm in brissie con,

If you have no luck getting one from a wreckers pm me mate, i've just looked it up, it's a 37310011a and it's $107 US!holy crap!

 $50 plus postage will be fine but i doubt wreckers know what new ones are worth so you should be able to get one for less surely.....

[OzzyRob]

They may not want to separate one from a swingarm.

[monstermick58]

Hi All,

This is why I like this forum, everyone helps everyone else.

Hi OzzyRob ,

Mick lives out Appin way, we have been on rides in the past. I haven't seen him on the forum for a while. - it is not bushfire season so he can't blame that. Probably busy with life like the rest of us ( any free time used for riding!!!!).
 
Hi loony888,

I am near Campbelltown so pretty close to where Mick lives. Where are you-how much do you want for the part?

Cheers,

Con

Err...
 
    I think you might have the wrong Mick






                                   Mmick