Homemade mods

[monster 795]

Thanks guys. I added a new link to the pics.

[TWDucfan]

Garage door opener built into the tank fairing 

GREAT IDEA !!! 

Didn't know there are room behind the tank panels. 

[djomlas]

fashioned up an open airbox mod out of an aluminum tray and velcro straps. it could use some cleaning up around the edges, it holds the filter quite snug although    /shitty blue collar mod

i just got removed the cover,connected 2 zipties on stock clamps, and thats it,  not going anywhere man.

[sleepyJ]

although your method probably works fine, I wanted to be sure air didnt get sucked in between the filter and the plastic airbox bottom.

[djomlas]

although your method probably works fine, I wanted to be sure air didnt get sucked in between the filter and the plastic airbox bottom.

definitely not a chance that can happen

[darksouls]

Years ago i took my dirtbike visor off and made it a headlight fairing on my 919. Looked medieval. I'll try to find a pic.

[Roadsurfer]

Hey guys!! I just made a custom headlight fairing for my 2002 monster 620 Dark.
The brackets are aluminum and the fairing is made of acrylic glass spray painted.
I hope you like it!!

[Pinion]

well pretty much all have been done with what was laying around the shop.
Tail chop, airbox removal as well as crank case box removal, fender cut, clean up wiring, paint, lic plate bracket, seat release, bla bla bla

[Yorkie]

Clutch case. Corse style.







Yorkie

[koko64]

As my 5 year old nephew would say,"You're a good maker"!

[SpikeC]

 Awl right! Hand tools rock! Nice eggbeater!

[blalor]

30 minutes into ownership I was ready to tear the fairing off; it flopped around so badly it was like someone was beating on my helmet.  If poorducrider were still around and making fairing stays, I'd have bought those.  Instead I finally finished -- well, mostly finished -- these, made from ¼" OD mild steel tubing.  The difference is immense.  70mph is quite comfortable.  Next up is a Zero Gravity ST screen.

[lobsta2]

very nice work.
interesting placement of EZ Pass too.

[blalor]

very nice work.
interesting placement of EZ Pass too.

Thanks!  EZ Pass didn't work in the one toll plaza I tried it at (which appears to be a little flaky for some others in town).  Might have to tweak that a bit…

[pkreegi]

Wanted a more fancy seat, so I had to make one






Also, the conventional tail chop was never to my taste, so I wanted to be a turd and make my own. The 3$ led-strip will hopefully arrive soon. Still need to cut/phase both sides and paint it. And ofcourse mount the LED. And make the frame caps... Eh, still a lot to do




Lol i have no idea how to post pictures properly here...

*thanks oldndumb! *