ABS removal 1100evo

[koko64]

Make the mod reversable for resale. If required get anothrr ECU for reflashing.

[SpikeC]

I think that koko is giving good advice, and to start the process just unplug the sucker and see what happens!

[racingj]

 Simple answer. Unplug the ABS module will result in no speedometer register. The bike will start / run without a problem. You'll get no speed indication. I bypassed the ABS module years ago on my 12' 1100EVO. Now the unanswered question is can the ABS module be bypassed with a jumper to recover speed sensor operation. 

[koko64]

How's it going?

[ducatista01]

Any updates?

[EEL]

I've never had issues with front brake feel on my evo. The key is to do the following mod.



Essentially the biggest issue i have noticed is that the abs controller tends to trap bubbles. It's the high point of the rear brake system and the midpoint of the front brake.

If you install banjo bleeders, they will still fit below the tank and allow you an extra bleed point in the future.

That said, this only works for improving brake feel.  If you are looking to remove all chances of abs activation, then this experiment is still an option.