yet another frankenmonster

[Pinion]

done for now, waiting on a clamp for exhaust, shakedown soon. I will call this the MSSWTF racer 

IMG_2966 by D charles, on Flickr

IMG_2967 by D charles, on Flickr

IMG_2971 by D charles, on Flickr

[koko64]

Lookin good

[Pinion]

thanks, runnin good too. just trying to get pc III dialed in. On the road though, yay

[Pinion]

Ahhhhh, a monster in its natural habitat............ asphalt

IMG_2977 by D charles, on Flickr

[koko64]

 

[Howie]

Nice 

[Pinion]

1st off, thanks to slide panda's post on this
http://www.ducatimonsterforum.org/index.php?topic=29134.0

here is the mod with pics, i did this a.m.
not difficult, and you will need the or a load balancer, led flasher. Diodes from radio shack, $5 for 20
pics show tools and prcess, which I got from Slide Panda's post.

IMG_3015 by D charles, on Flickr

IMG_3013 by D charles, on Flickr

IMG_3014 by D charles, on Flickr

IMG_3017 by D charles, on Flickr

IMG_3018 by D charles, on Flickr

[Pinion]

Also on the 2nd half of arts and crafts day
crank case breather catch can.
I chose the gum out injector cleaner bottle for both size and throat is same diameter as filter clapm area, not to mention the cool graffics i got for free
cut and heated up throat to create flang. bores 7/8" hole at bottom. epoxied right angle irrigation connector. shower scrunchie is to defuse oil from air. wallah, $5 catch can

IMG_3019 by D charles, on Flickr

IMG_3022 by D charles, on Flickr

IMG_3023 by D charles, on Flickr

IMG_3024 by D charles, on Flickr

[Pinion]

oh and rear turn signal day too

IMG_3020 by D charles, on Flickr

[GK]

That's quite a day you've had!
Great job! ðŸ'ðŸ»ðŸ'ðŸ»

[pitbull]

Haven't checked this thread for awhile.

Fantastic job, I love the minimalist look!

[NAKID]

Looks very cool. Although I think a seat cowl would complete the look.

[Pinion]

Im going to make one this winter. but that is what got me into my last project, it all started with the seat   

Untitled by D charles, on Flickr

[Pinion]

so starts another year, proabably not much movement will happen with this one. Will be renovating and adding on to my new house, oh yeah, I moved
stripped the tank, filled the dents with aluminum, did milled finish on gas cap.
have a whole new frame with some Paul Smart wheels set aside for this one, just not sure when I will get to it
Untitled by D charles, on Flickr

Untitled by D charles, on Flickr

Untitled by D charles, on Flickr

[NAKID]

Is it just me or is the fuel filler crooked and backwards?