PC III for an 07 S4RS

Started by A John In NJ, October 10, 2018, 08:17:51 AM

Previous topic - Next topic

A John In NJ

Good day folks!

I've gone through the internet looking for an answer to my question. Is there a list or a sticky that states which Power Commander III models match the connecting wires to my 07 S4RS. I've seen that riders/tuners have used other year Monster PCIIIs to dyno tune their bikes.

Any help would be greatly appreciated!

-John

Heath

#1
This may not be the answer you want to hear. With all the advancements in ECU mapping I would rather go with a custom remapped ECU for a PCIII. Less wiring on the bike, less to go wrong. Much better than a piggy back system.
2007 Ducati Monster S4RT
2006 Ducati Monster S2R800 Dark [sold]

Howie

Quote from: Heath on October 16, 2018, 08:39:22 PM
This may not be the answer you want to hear. With all the advancements in ECU mapping I would rather go with a customer remapped ECU for a PCIII. Less wiring on the bike, less to go wrong. Much better than a piggy back system.

[thumbsup]

GK

I have a PCIII and agree with the wiring comments. I am however very happy with the tuning results.

If the cost was the same, I certainly see why you’d go the ECU route.
2001 Ducati  Monster 900S ie
JE high comp pistons, bit of porting, open airbox with DP filter, PC3 with custom map, CCW matched injectors, Termignoni cf slip ons, 14:39 gearing.

Gone but not forgotten!
Honda VFR800i, Honda CBR600F3, Honda CBX750, Norton Commando 750S, Suzuki GS750, Yamaha XT250, Kawasaki Z250, Kawasaki KX80, Honda XL250, Suzuki TC100.

koko64

Any luck? I note that some PC units are discontinued.
2015 Scrambler 800

Saltash

Power Commander III USB No. 733-411 for Ducati Monster S4R 2007-2008 - discontinued.

Microtec m197 bit expensive.

Found Rexxer dealer than can flash ECU, and then do a dyno tune. Most places just offer canned tunes based on components fitted. If u r happy with that, no worries. I've just always had dyno tuning with my cars/bikes..

koko64

A canned map is a baseline IMO so I agree that a good dynotune finishes the job properly. Pity you can get a PC for it. Who is able to re flash and dyno tune to the ECU in your area?
2015 Scrambler 800

Saltash

Firstly, I'm in Australia.
The guy who has the Rexer rights for Australia, Gary Naysmith has a business : Torque Power Motorcycles, and he says: "Dyno tuning no problem, depending on how long is needed to do a custom map $AU 600-$800"
I just have to wait till my Arrow race pipes are cut and integrated with an SC Project OVAL R60 / CARBON FIBER / D07-07C - then book in. Xmas New Year means waiting till 6th Jan to book for exhaust work.

koko64

I'm in Melbourne. Brad Black (bikeboy) does re flashes down here. So this bloke can write a custom Rexxer map via dyno tuning? Awesome.
2015 Scrambler 800

Saltash

He didn't deliver. Tried to sell me a canned tune when I was ready for dyno. After a few false leads found Fred at Procycle Dyno (Brisbane) who did a great job.