Wrath of Jon
New Member
 Offline
Posts: 20
|
 |
« Reply #15 on: May 26, 2019, 01:09:46 PM » |
|
Took the tank off and checked the lines and they seemed to be good to me.
Tried to check the spark plug but I need a 3/8 to 1/2 socket adapter to reach the plug.
Measured the coil plugs resistance and it was about 1.2 ohms I think, the service manual says it should be 650 +/- 50, but still dont see why that would have caused it to shut down mid ride like it did.
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #16 on: June 08, 2019, 10:28:41 AM » |
|
Put a bottle of HEET into the tank ,added some 91 octane, and adjusted the fuel pressure regulator and the bike fired up for me!!!
Now the red light is still on though and it won't go off after driving around town a bit so I am scared to take her anywhere still
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
Speeddog
West Valley Flatlander
Flounder-Administrator
Post Whore
Offline
Posts: 14813
RIP Nicky
|
|
« Reply #17 on: June 08, 2019, 11:40:26 AM » |
|
Please.
Stop running the motor.
The next time you start the motor absolutely have a gauge connected to check the oil pressure.
Please.
|
|
|
|
« Last Edit: June 08, 2019, 11:42:50 AM by Speeddog »
|
Logged
|
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #18 on: June 08, 2019, 12:21:11 PM » |
|
I dont know what pressure I'm looking for if I do hook a gauge up to it
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
|
Howie
|
|
« Reply #19 on: June 08, 2019, 12:26:04 PM » |
|
Scroll back in this thread. I gave you the specs.
|
|
|
|
|
Logged
|
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #20 on: June 08, 2019, 12:56:14 PM » |
|
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
Speeddog
West Valley Flatlander
Flounder-Administrator
Post Whore
Offline
Posts: 14813
RIP Nicky
|
|
« Reply #21 on: June 08, 2019, 01:18:39 PM » |
|
If that has an M10x1 threaded fitting.
|
|
|
|
|
Logged
|
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #22 on: June 09, 2019, 10:07:13 AM » |
|
Sure does, thanks
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #23 on: June 13, 2019, 04:07:36 PM » |
|
So just tested the cold start pressure and I'm getting 6 bar idle to 7 bar when revving up
Warmed up I'm getting about 4 bar at 1000 rpm and up to 6.5 while revving
Only revved to 4000rpm
Sent from my VS995 using Tapatalk
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
ducpainter
The Often Hated
Flounder-Administrator
Post Whore
Offline
Posts: 78941
DILLIGAF
|
|
« Reply #24 on: June 13, 2019, 04:41:44 PM » |
|
Doesn't seem to be an oil pressure problem.
|
|
|
|
|
Logged
|
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
perspective
is even more amazing than yours."
To realize the value of nine months:
Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #25 on: June 13, 2019, 07:28:38 PM » |
|
Well I couldn't help myself.
I took it out for a decent ride and just unplugged the oil pressure switch, so the light would stay off. Rode just fine. Guess it really is just the switch?
Sent from my VS995 using Tapatalk
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
|
Howie
|
|
« Reply #26 on: June 13, 2019, 08:58:02 PM » |
|
Yes.
|
|
|
|
|
Logged
|
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #27 on: July 02, 2019, 05:39:01 AM » |
|
So I ordered a new oil pressure switch from Ducati of Omaha and it's acting the same as the old switch...
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
ducpainter
The Often Hated
Flounder-Administrator
Post Whore
Offline
Posts: 78941
DILLIGAF
|
|
« Reply #28 on: July 02, 2019, 05:50:28 AM » |
|
Is the connector making good contact?
You can, carefully, use a pick to slightly bend the female spade connector to tighten it. If there's no plastic protector, you can use pliers.
|
|
|
|
|
Logged
|
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
perspective
is even more amazing than yours."
To realize the value of nine months:
Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”
|
|
|
Wrath of Jon
New Member
Offline
Posts: 20
|
|
« Reply #29 on: July 28, 2019, 05:08:07 PM » |
|
So after trying to use compressed air and dielectric grease. I just used some WD40 contact cleaner on it and it's working fine now. This is the new one thats working. I'll try putting the old one on later and see if it works now too.
|
|
|
|
|
Logged
|
2004 Ducati Monster S4R
|
|
|
|
