3D printed headlight adapter

[ajw85]

Sure thing!

STL - http://www.filedropper.com/ducatiheadlightadapterringv02a

Gcode - http://www.filedropper.com/ce3producatiheadlightadapterringv02a  (if you just want to print it, those were the settings I used.)

It does sit the headlight pretty far out from the interior of the bucket, that was by design, so the secondary ring could have the space needed to capture the LED housing, and allow the spring clips to have enough tension still.  It might work as-is, with the spring clips bent inwards, but I haven't tested it that way. 

Do you happen to have the STL for the secondary ring that goes on the back?

[greencow]

Hey, sorry man, I didn't see this until now.  If you still need it, it's here.  http://www.filedropper.com/ducatiheadlightadapterringclampv02a

[greencow]

Old links have long since died for the 3D file, put the current design up on thingiverse

https://www.thingiverse.com/thing:6279797

[Heath]

Very cool, thanks for updating.