Ducati Monster Forum

powered by:

March 28, 2024, 04:34:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the DMF
 
   Home   Help Search Login Register  



Pages: [1]   Go Down
  Print  
Author Topic: torque specs  (Read 2253 times)
whitechocolate781
New Member
*
Offline Offline

Posts: 10


« on: September 21, 2021, 10:18:41 PM »

does anyone know the torque specs for the pinch bolts and center nut on the triple clamps on an 00 monster.
Logged
ducpainter
The Often Hated
Flounder-Administrator
Post Whore
*****
Offline Offline

Posts: 78191


DILLIGAF


« Reply #1 on: September 22, 2021, 02:47:22 AM »

http://www.ducatimonsterforum.org/index.php?topic=373.0

Hope what you're looking for is in there.
Logged

"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


stopintime
Hero Member
*****
Offline Offline

Posts: 8912


S2R 800 '07


« Reply #2 on: September 22, 2021, 02:51:56 AM »

Lower triple fork pinch screws 1-2-1 pattern, greased and 20Nm

Top triple fork pinch screw greased and 24Nm

Top triple center screw greased and 23Nm

Steering bearings ring nut (the large in center of everything) greased and 30Nm
Logged

237,000 km/sixteen years - loving it
ungeheuer
ɹǝʌO d∩ uıɐןɐɹʇsn∀
Local Moderator
Post Whore
*****
Offline Offline

Posts: 20604


Often wrong. Never in doubt.


WWW
« Reply #3 on: September 27, 2021, 10:21:09 AM »

does anyone know the torque specs for the pinch bolts and center nut on the triple clamps on an 00 monster.
Yes they do.

You're welcome.
Logged

Ducati 1100S Monster Ducati 1260ST Multistrada + Moto Guzzi Griso 1200SE


Previously: Ducati1200SMultistradaDucatiMonster696DucatiSD900MotoMorini31/2
Ddan
Some of my best friends are whores
Hero Member
*****
Offline Offline

Posts: 9079



« Reply #4 on: September 28, 2021, 08:03:26 AM »

 Grin

Yes they do.

You're welcome.
Logged

2000 Monster 900Sie, a few changes
1992 900 SS, currently a pile of parts.  Now running
                    flogged successfully  NHMS  12 customized.  Twice.   T3 too. 
Ducati Monster Forum at
www.ducatimonsterforum.org
Qomomoko
Full Member
***
Offline Offline

Posts: 219


Return of the Yoga


« Reply #5 on: January 22, 2022, 03:42:35 PM »

I can email you a pdf of the frame and engine torque specs from a 2001 monster S4 manual .
It’s 4-6 pages long . Pm me if it is useful to you.

It shows the pinch bolts 20 nm 1-2-1 as stated above.
Logged
Orange16
New Member
*
Offline Offline

Posts: 44


« Reply #6 on: January 23, 2022, 01:25:18 AM »

2000 should be a small steering stem bike, not the large stem with top nut style like the ST frame based S4.  2V models didn't get the ST based frame until 2002 model year.

I use 20Nm on all the pinch bolts with the bolts greased.  The lower and upper triple bolts I do 1-2-1-2-1-2-1-2 until they stop moving.  That way both bolts have the same loading on them and hopefully constant loading across the width of the clamping material.

The top ring nut that loads the steering head bearings I give a bit of a nip, but it's not really tight as such.  Then I fit the upper triple clamp, screw the top hex nut down and give it a bit of a nip to set the upper triple against the ring nut without really loading it and changing the steering head bearing loading - which is the point of this procedure.  Then torque all the upper triple pinch bolts to stop it going anywhere.  Once I've done that, I undo the top hex nut and then nip it up again with a bit more force.

But because the upper triple is clamped onto the steering stem, the ring nut is now pretty much immune to load from the top hex nut - within reason of course.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1