been a while since I updated....
I have been using the bikes quite a lot, despite the cold and wet spells of weather! One thing that’s always bugged me on the last Ducati build was the side mounted number plate… so when i was checking the bike over and noticed a crack in the plate, (poor design and manufacture on my part, I am ashamed!) I decided to fit a rear mounted one the same as a lot of bikes use these days, and also the same as I did on the honda build...
I made the bracket out of 12 and 16mm ERW steel tube which I cold bent around a former. it the walls on the former are nice and thick, you can do quite tight bends without kinking. I also made a carbon fiber finisher, using the tyre shape to create a mould. (I covered the tyre with tin foil first!) it came out rather well!
The other thing that bugged me was a slight fluffynes/hesitation on initial acceleration. I backed off the advance just a little and it completely disappeared! Red Vs blue line in the graph. just shows what a small adjustment can make!