Ducati Monster Forum

powered by:

December 30, 2024, 09:36:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Tapatalk users...click me
 
   Home   Help Search Login Register  



Pages: [1]   Go Down
  Print  
Author Topic: Starter stuck on , will not start M695 2006?  (Read 1590 times)
Phl2002M750
New Member
*
Offline Offline

Posts: 2


« on: September 11, 2023, 09:57:13 AM »

Good day,

I am wondering if I have a common problem because my 2002 M750 has a simlar issue.

Recently it just cranks and does not start.  
Also does not seem to be prming fuel when start switch is on

Typcial start up is key on, watch engine check from spedo indicators cycling,
clutch in
Kick stand up
Engine in neutral

Engage start button, release
Issue at hand

All of the above,  engine does not start
remove finger from start button.
Engine continues to crank, this is a Ducati feature unlike other motorcycles

l
turn off red engine button,  Starter stops cranking.  A Ducati thing  

Seems like it is fuel starved.  What wire compoents are part of the eletrionic priming?

Any thoughts?

Thank you

« Last Edit: September 11, 2023, 06:51:28 PM by Phl2002M750 » Logged
stopintime
Hero Member
*****
Offline Offline

Posts: 9045


S2R 800 '07


« Reply #1 on: September 11, 2023, 10:21:21 AM »

That's a starting "cycle". Push button once - starter continues.

The "not starting" is not connected. Maybe borrow the under-ignition-lock-cover antenna from the 750. If that makes it start you MIGHT have a half broken antenna. Try several times during the next days to make sure (if it's now always starting, you were right). I'm assuming the antenna is common for both bikes, but you should check in the parts catalogs.
Logged

252,000 km/seventeen years - loving it
Howie
Post Whore
******
Offline Offline

Posts: 17289



« Reply #2 on: September 12, 2023, 06:28:39 AM »

You might have two problems.  Yes, press starter button, release, still cranks, but not forever.  Count to ten (I don't remember how long it should be) it should stop cranking.

I suspect your not priming problem might be the fuel injection relay.  Before doing anything  see if the relay clicks when you hit the starter button with the key on.  If not, remove relay and at the connector, key on, you should have voltage at terminal 30 and 85.  86 is ground.  If you do, test or replace the relay. If not, you have a wiring problem. 

To test the relay, 12 volts from the battery to terminal 30.  86 to ground battery.  Apply voltage to 85 and you should have voltage at 87.  Or jut buy a new relay.  Cheap enough, and it is not a bad idea to have an extra around.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1