2005 S4R thermostat question

Started by DucHead, Today at 12:41:22 PM

Previous topic - Next topic

DucHead

Gee-whiz - it's been a while since I posted.  I'm still riding my Monster and a bevy of Suzukis.  [Dolph]

I read through a few thermostat threads on the board, but didn't see exactly what I was searching for... dMy Monster coolant temp gets quite high (up to 200°F while riding), and I thought perhaps the thermostat shit the bed. So I drained the coolant and removed the thermostat and it opens at ~165°F. I cycled it a few times and it seems to be working although the opening temp seems a little high. I'm going to flush the system with 1:1 vinegar:DI water once the new silicone hose kit arrives and I re-assemble everything.

I believe that the two sensors that connect to the unions are to trigger the radiator fans, so I don't think that could be a problem.

Any thoughts?
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

Duck-Stew

IIRC, one is the fan switch (on/off through a relay) and the other sends the temp (variable voltage signal) to the ecu.
Bike-less Portuguese immigrant enjoying life.

ducpainter

I might not have a ton of relevant information to add, but my track bike, that has no fan, runs at 180 while moving. No clue about the thermostat condition.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."



DucHead

'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"