Video cam on my bike ????

[Super T.I.B]

Here you go

And don't say I don't do anything for you!

[Dockstrada]

Thanks nice video wt:

Man that old place is cold now, that sad its like the deserted town of Chernobyl 

[Betty]

Understand the view issues with the screen in place and the greater speed sensation for a lower mount.

But the video on Big T's link shows how the highmount gives a pretty decent cornering sensation as the camera is moving further from side to side - I found myself leaning into the corners.

[Dockstrada]

So Matty when do you think we can look at the setup for my monster it would be great if it was ready fro the 31st 

[mattyvas]

So after a preliminary look see today.
Do you wanna go to the JayCar store tomorrow afternoon?
There is one near you in Botany.

Let me know if you have time mid arvo-ish.

[Dockstrada]

So after a preliminary look see today.
Do you wanna go to the JayCar store tomorrow afternoon?
There is one near you in Botany.

Let me know if you have time mid arvo-ish.

Yeh seems ok, say about 2ish 

I know the store i have  been there before

[mattyvas]

Yeah should be good 2ish
Will buzz you before.

[Dockstrada]

You going to be on 2 wheels 

[mattyvas]

Wasn't planning on it but can if you need me too.

[Dockstrada]

Wasn't planning on it but can if you need me too.

what ever suits you im not fussed

[Pakhan]

Hey fellow bikers from down under.  I am invading your board from NYMMC because I did a search on cams and found your thread.  We in NYMMC have also been toying around with cams and a buddy (Cru Jones) bought the Oregon Scientific cam and mounted it on a monster and an RC51.  In the first thread we had a brief talk about cams and in the second we posted some videos.  If your curious about mounting ask Cru in our section or if you were curious about the quality check out the vid in the second thread.  It might be worse than original due to youtube compression, not sure.

See ya guys, ride safe. 


http://ducatimonsterworldwide.org/index.php?topic=3836.30

http://ducatimonsterworldwide.org/index.php?topic=4524.0

[Super T.I.B]

Hey fellow bikers from down under.  I am invading your board from NYMMC because I did a search on cams and found your thread.  We in NYMMC have also been toying around with cams and a buddy (Cru Jones) bought the Oregon Scientific cam and mounted it on a monster and an RC51.  In the first thread we had a brief talk about cams and in the second we posted some videos.  If your curious about mounting ask Cru in our section or if you were curious about the quality check out the vid in the second thread.  It might be worse than original due to youtube compression, not sure.

See ya guys, ride safe. 


http://ducatimonsterworldwide.org/index.php?topic=3836.30

http://ducatimonsterworldwide.org/index.php?topic=4524.0

Thanks Pakhan. 

Dockstrada has already mounted a Canon onto his radiator?? on his S4R and taken heaps of vids, I'm pretty sure if you did some searching here on our board, you would find 'em.

And Big T is rigging up a rear facing camera to be mounted on a seat cowl, should be interesting, make sure you come back and have a look. 

[Betty]

Big T doesn't need the rear cowl for the camera mount with the new seat on the way. It has an in-built video camera with hydraulic actuators and a fully integrated ohlins suspension system to smooth out the picture .... it also has a pop-up widescreen so he can replay the footage for us at pit stops.

[mattyvas]

handmade by Egyptian Goddess remember.......

[bazz20]

as you know i tried different position but for me i liked be hind screen , less wind noise , shows good leen angles , and is protected  im just saving to get an oregon camera , dont know if you seen my post about it but what i did like was its water and shock proof and it mountings only take seconds to change so you can make or youse the ones supplied so want front shot clip it there want back shot clip it there http://www.bikeme.tv/tabid/91/articleType/ArticleView/articleId/194/Default.aspx